Catálogos >
Xylem >
INTERNATIONAL Midland-ACS Over Pressurisation Device

INTERNATIONAL Midland-ACS Over Pressurisation Device
1 / 10Páginas

Excertos do catálogo

INTERNATIONAL Midland-ACS Over Pressurisation Device - 1

Over Pressurisation Device OPD SILSAVE Over Pressurisation Device OPD Silsave Product Showcase

INTERNATIONAL Midland-ACS Over Pressurisation Device - 2

Over Pressurisation Device OPD SILSAVE From the day the company was founded in 1956 it was decided that our business should be built on the premise of creating solutions that far outweigh expectations. Over recent years users of Regulators and Filter Regulators have become aware of the consequences of the failure in service of such equipment including the potential for damage to pressure sensitive instruments, actuators and process valves which may compromise critical ESD systems, resulting in unscheduled production shutdowns and expensive repairs. We have always had a strong, experienced...

Abrir o catálogo na página 2

INTERNATIONAL Midland-ACS Over Pressurisation Device - 3

Over Pressurisation Device OPD SILSAVE • Specifically designed for Severe Offshore Environments • Functional safety data available upon request • ¼” and ½” connection sizes • Auto shut-off • ¼ turn actuator and on/off valve protection • Linear actuator and control valve protection • System instrumentation equipment protection • Process valve stem & seat saver • Easy Installation • 316 Stainless Steel Construction • Compliments and protects ESD & safety instrumented system equipment • Ambient Temperature Range -20ºC to +80ºC (Low temperature version -50ºC) • Protection of equipment from...

Abrir o catálogo na página 3

INTERNATIONAL Midland-ACS Over Pressurisation Device - 4

Over Pressurisation Device OPD SILSAVE Development Failures of pressure regulators can result in the over pressurisation of the downstream line, as the self-relieving capacity of the regulator is insufficient to cope with major failures. Usually a relief valve of sufficient capacity is fitted into the system to hold the pressure down to an acceptable level. However a relief valve flow is sized on a pressure differential between set pressure and over pressure, usually 10%. Thus on a set pressure of 4.5 barg a pressure rise to 4.95 barg would have to flow sufficiently to hold the pressure at...

Abrir o catálogo na página 4

INTERNATIONAL Midland-ACS Over Pressurisation Device - 5

Over Pressurisation Device OPD SILSAVE Over Pressure Device Operating Poppet Valve 0.2 Litre Isolation Valve ¼ Turn Ball Valve Overpressure Valve Performance Characteristics • Response times are dependant upon the actual pressures within the system at the point of failure; all times stated within the specification section are maximums taken at the lowest extreme of the pressure range (worst case). The magnitude of any pressure spikes exceeding the trip pressure which occur during deployment of the valve are dependant upon the system downstream volume; a larger system volume decreases the...

Abrir o catálogo na página 5

INTERNATIONAL Midland-ACS Over Pressurisation Device - 6

Over Pressurisation Device Larger actuator test results. volume of 3 Litres. Trigger Test- Blue = Actuator Pressure (Bar) The graph above is an overpressure test result with a larger 3 litre reservoirto simulate the actuator. An overpressure signal is allowing the 11 barg supply pressure to bypass the regulator, simulating a ruptured diaphragm. The response time of the device is measured as the time between the pressure within the device reaching the trip pressure and the actuator pressure returning to below the regulated pressure (see dashed lines on graph & right hand column of table)....

Abrir o catálogo na página 6

INTERNATIONAL Midland-ACS Over Pressurisation Device - 7

Over Pressurisation Device OPD SILSAVE MB - Dimensions for model with mounting bracket option PG - Dimensions for model with pressure gauge option TP - Dimensions for model with tamperproof cap option OPD - Dimensions for Manual Drain Version OPA - Dimensions for Automatic Drain Version Maximum Response Time • Trip Pressure Range • Temperature Range • Maximum Inlet Pressure • Regulated Outlet Pressure •

Abrir o catálogo na página 7

INTERNATIONAL Midland-ACS Over Pressurisation Device - 8

Over Pressurisation Device TRIP PRESSURE AUTO DRAIN MB - Dimensions for model with mounting bracket option PG - Dimensions for model with pressure gauge option TP - Dimensions for model with Drain Version Drain Version ENGRAVE PART/SERIAL POSITION SHOWN RESET BUTTON Maximum Response Time Trip Pressure Range Temperature Range Maximum Inlet Pressure Regulated Outlet Pressure

Abrir o catálogo na página 8

INTERNATIONAL Midland-ACS Over Pressurisation Device - 9

Over Pressurisation Device OPD SILSAVE 1/8" NPT Rear Gauge Port (Plugged) Mounting bracket and gauge option shown Maximum Response Time 30ms ½” NPT Inlet Trip Pressure Range • Temperature Range Standard: -20ºC to +80ºC (-4ºF to +176ºF) Low Temp: -50ºC (-58ºF) (optional) Reset Button Maximum Inlet Pressure • Regulated Outlet Pressure 4 - 8 bar Manual drain operation shown Automatic drain option available

Abrir o catálogo na página 9

INTERNATIONAL Midland-ACS Over Pressurisation Device - 10

Xylem 1) The tissue in plants that brings water upward from the roots; 2) a leading global water technology company. We’re 12,500 people unified in a common purpose: creating innovative solutions to meet our world’s water needs. Developing new technologies that will improve the way water is used, conserved, and re-used in the future is central to our work. We move, treat, analyze, and return water to the environment, and we help people use water efficiently, in their homes, buildings, factories and farms. In more than 150 countries, we have strong, long-standing relationships with customers...

Abrir o catálogo na página 10