Catálogos >
WISKA Hoppmann GmbH >
CONMAXX® Gland

CONMAXX® Gland
1 / 2Páginas

Excertos do catálogo

CONMAXX® Gland Divided retrofit cable entry Divided retrofit gland for changes during operation The CONMAXX® Gland consists of a 2 part gland and locknut which facilitate the installation of pre-fabricated cables and wires. Therefore maintenance can be conducted inexpensively during operation. CONMAXX® Gland is part of WISKA´s innovative cable entry system CONMAXX®. It convinces with its diverse sealing elements and grid inserts for maximum installation flexibility. Sizes from M 20 to M 63 and the option of using a cross shaped grid offer maximum flexibility. CONMAXX® seals: Split sealing inserts in two sizes for pre-fabricated cables, standard wires, corrugated sleeves and special wires Your benefits with CONMAXX® Gland Saves time and money Maintenance works and changes in the installation performed without loss of production High protection class IP 66 with strain relief Hot Temperatures from -40 °C to 120 °C and UL 94 HB with black CONMAXX® seals Suitable cable sizing for pre-fabricated cables M 20 to M 63 Versatile Diverse split and multiple sealing elements from 2 mm to 33 mm diameter CONMAXX Gland® is part of the cable entry system CONMAXX® with multiple sealing elements and grid

Abrir o catálogo na página 1

Easy as 1, 2, 3: Assembling the CONMAXX® Gland Step 1 - Position CONMAXX® seal: Push divided CONMAXX® seals open so that you can put it around the already installed cable Step 2 - Mount CONMAXX® Gland: Put both gland halfs of the CONMAXX® Gland around the seal and close the shells of the gland Step 3 - Mount locknut: Put the two part locknut around the cable on the other side of the installation. Close locknut and screw on cable gland thread Technical Data Assembling the CONMAXX® Gland is fast and easy: First lay the seal around the cable, then close the shells of the gland, finally install...

Abrir o catálogo na página 2