

Excertos do catálogo

A Teledyne Marine Product Datasheet INS Surface Navigation Systems When Performance Matters SATURN INS (Inertial Navigation System), from Teledyne TSS, is a world leading surface navigation system which offers enhanced unparalleled INS performance which builds on the TSS SATURN fibre optic gyro compass system by adding inertial navigation (INS) capability. As with SATURN, it is available in three standard heading accuracy variants: 0.1° sec lat. (SATURN10INS), 0.3° sec lat. (SATURN30INS) and 0.5° sec lat. (SATURN50INS). Inertial position data is produced using an INS algorithm, within the firmware framework of SATURN whilst attitude data is delivered via accurate roll and pitch performance of 0.01° (SATURN10INS) and 0.05° (SATURN30/50INS), and a heave performance of 5cm or 5%. The SATURN INS operates at its ultimate performance when connected to an accurate external sensor such as GPS. SATURN offers a fast alignment time of only 10 minutes, from switchon. All SATURN INS units are IMO approved and are WheelMark certified to the Marine Equipment Directive. PRODUCT FEATURES AND BENEFITS • Three model options: 0.1°, 0.3° and 0.5° sec lat heading accuracy • Position, heading, pitch, roll, heave and velocity outputs • Compatible with GPS, EM Log and DVL • Low power consumption compared to RLG alternatives • Maintenance free with high MTBF • Based on the dependable Teledyne TSS FOG IMU A member of Teledyne Marine • Built in DVL calibration functionality • Fast alignment time, from switch-on to settle • IMO approved and WheelMark certified • Simple configuration and set up via TSS common embedded browser • Robust alumini
Abrir o catálogo na página 1
A Teledyne Marine Product Datasheet $ SATURN INSSurface Navigation SystemsTECHNICAL SPECIFICATIONS TELEDYNE TSSEverywhereyoulook" C€ Specifications subject to change without notice. © 2019 Teledyne Ltd. All rights reserved. Teledyne Marine ABZ Business Park, International Avenue, Dyce, Aberdeen AB21 0BH, UK Tel: +44 (0)1224 772345 Fax: +44 (0)1224 772900 www.teledynemarine.com/tss Email: tsssales@teledyne.com
Abrir o catálogo na página 2Todos os catálogos e folhetos Teledyne D.G.O'Brien
-
Single Pin Horizontal EFS
2 Páginas
-
Omicron
5 Páginas
-
Nautilus WM10-250
2 Páginas
-
Nautilus™ WM1.7-60
2 Páginas
-
FACT
2 Páginas
-
Compact FACT
2 Páginas
-
100 Series Connector
2 Páginas
-
110 Series Coaxial Connector
2 Páginas
-
107 Series Connector
1 Páginas
Catálogos arquivados
-
Sentinel V
4 Páginas
-
Gavia Autonomous Underwater Vehicle
6 Páginas
-
Pinnacle 45
2 Páginas
-
ChannelMaster
4 Páginas
-
Teledyne Marine Vehicles
24 Páginas
-
LED-V-Series
2 Páginas
-
UTS-9400
2 Páginas
-
RiverPro ADCP
2 Páginas
-
RiverRay ADCP
2 Páginas
-
DGO Standard Products Catalog 2018
25 Páginas
-
DGO 108 Series Connectors
2 Páginas
-
DGO Product Selection Guide
5 Páginas
-
ODI FACT
2 Páginas
-
ODI Ceramic Penetrator P10-250
2 Páginas
-
ODI WM6-175 Subsea Power Connector
2 Páginas
-
ODI Nautilus WM10-250
2 Páginas
-
DGO Standard Products Catalog
25 Páginas
-
TMIS Impulse Ethernet Data Sheet
2 Páginas
-
Impulse Splash Mate Connectors
1 Páginas
-
ODI Extended Ethernet
1 Páginas
-
ODI Hybrid FACT
1 Páginas
-
ODI Nautilus Rolling Seal Hybrid
1 Páginas
-
PDM QuickCure Molding System
1 Páginas
-
Storm Cable Capabilities
1 Páginas
-
Penetrators and Feedthroughs
1 Páginas
-
Product catalog:DGOstdcat
34 Páginas