ABC 3
1 / 4Páginas

Excertos do catálogo

PRODUCT DATA SHEET ABC® 3 DESCRIPTION One-component, high-performance, self-polishing antifouling PRINCIPAL CHARACTERISTICS • 30+ years of proven performance • Controlled ablation rate due to unique binder formulation • Smoothing action helps reduce drag resistance • No maximum time to launch • Suitable for a wide range of operating environments • Tin-free formulation • Capable of 60-month performance COLOR AND GLOSS LEVEL • Red, black, light blue • Flat Note: Colors may vary from batch-to-batch BASIC DATA AT 68°F (20°C) Data for product Number of components Volume solids Recommended dry film thickness 4.0 - 6.0 mils (100 - 150 µm) depending on system Theoretical spreading rate Shelf life At least 18 months when stored cool and dry RECOMMENDED SUBSTRATE CONDITIONS AND TEMPERATURES • Coating performance is proportional to the degree of surface preparation. Refer to the application instructions for specific primers and intermediate coats for application and curing procedure. All previous coats must dry and free of contaminants. Adhere to all minimum and maximum topcoat times for specific primers and intermediate coats Substrate temperature and application conditions • Surface temperature during application should be between 0°F (-18°C) and 120°F (49°C) • Surface temperature during application should be at least 5°F (3°C) above dew point • Ambient temperature during application and curing should be between 0°F (-18°C) and 120°F (49°C) • Relative humidity during application and curing

Abrir o catálogo na página 1

PRODUCT DATA SHEET ABC® 3 SYSTEM SPECIFICATION • Primers: AMERCOAT 370, AMERCOAT 385, AMERLOCK 2/400, AMERCOAT 235, AMERCOAT240, AMERCOAT 240LT, INSTRUCTIONS FOR USE • Agitate with a power mixer for 1 – 2 minutes until completely dispersed. Ensure good off-bottom mixing Application • Area should be sheltered from airborne particulates and pollutants • Ensure good ventilation during application and curing • Provide shelter to prevent wind from affecting spray patterns Material temperature Material temperature during application should be between 40°F (4°C) and 90°F (32°C) Air spray • Use...

Abrir o catálogo na página 2

PRODUCT DATA SHEET Cleaning solvent AMERCOAT 12 CLEANER or AMERCOAT T-10 THINNER ADDITIONAL DATA Overcoating interval for DFT up to 6.0 mils (150 µm) Overcoating with... Note: Protect hull from heavy impact and abrasion for at least 72 hours Curing time for DFT up to 6.0 mils (150 µm ) Substrate temperature Service- water immersion Product Qualifications • Mil-PRF-24647 • ABS type approval as a tin-free antifouling SAFETY PRECAUTIONS • For paint and recommended thinners see INFORMATION SHEETS 1430, 1431 and relevant Material Safety Data Sheets • This is a solvent-borne paint and care should...

Abrir o catálogo na página 3

PRODUCT DATA SHEET ABC® 3 REFERENCES • CONVERSION TABLES • EXPLANATION TO PRODUCT DATA SHEETS • SAFETY INDICATIONS • SAFETY IN CONFINED SPACES AND HEALTH SAFETY, EXPLOSION HAZARD – INFORMATION SHEET INFORMATION SHEET INFORMATION SHEET INFORMATION SHEET TOXIC HAZARD WARRANTY PPG warrants (i) its title to the product, (ii) that the quality of the product conforms to PPG’s specifications for such product in effect at the time of manufacture and (iii) that the product shall be delivered free of the rightful claim of any third person for infringement of any U.S. patent covering the product....

Abrir o catálogo na página 4