Catálogos >
SELDÉN MAST >
Seldén CXe45

Seldén CXe45
1 / 7Páginas

Adicionar aos Favoritos

Excertos do catálogo

CXeBS CXe 45 ELECTRIC CODE 0 FURLING SYSTEM

Abrir o catálogo na página 1

Relax and enjoy the power of Code 0 sailing - Effortlessly (Through Deck) ELECTRIC CODE 0 FURLING SYSTEM Having a furling Code 0 sail set on the bowsprit will deliver the joy that powerful and efficient sailing provides. Combined with a furling jib you will have the ultimate headsail wardrobe from broad reaching to beating upwind, all without leaving the cockpit. The addition of push button convenience guarantees an effortless sailing experience.

Abrir o catálogo na página 2

"The CXe 45 is exceptionally easy to handle, partly because of the high speed when furling the sail. It takes effortless sail handling in light air to a whole new level." Magnus Rassy, CEO and owner of Hallberg-Rassy Varvs AB

Abrir o catálogo na página 3

On Deck or Through Deck CXe can be integrated into the bow or bowsprit with a through-deck installation. This permanent installation is always available, ready for the furled sail to be connected. Like other electric functions from Seldén, CXe runs on SEL-Bus and a Power Supply Unit (PSU) converting 12V or 24V to 42V. SEL-Bus is a can-bus system with software that combines intelligence and power on board to sense and adapt loads for maximum efficiency and safety. Once you have installed SEL-Bus you can connect additional functions and run them all on the same PSU. 42V allows for smaller...

Abrir o catálogo na página 4

Code 0 halyard with 2:1 purchase 545-468 To boost the performance when using a Code 0, the halyard load must be higher than what normal halyard boxes and stoppers can handle. Therefore, a 2:1 purchase needs to be arranged by fixing the dead end of the halyard in the mast and letting it run through a block attached to the halyard swivel. Position on the mast must be specified by Selden. In most cases Code 0 sails need to be hoisted lower than gennakers and spinnakers. Halyard swivel Model Block for 2:1 purchase Model Art. No. Dim. Weight, L1 L2 W D Safe Breaking Max line working load, size,...

Abrir o catálogo na página 5

Mast Max rope, Max RM at 30° heel, kNmsection 0 mm 508-843-01R C156-F228 12 Cable clamps To fit thimbles to the Selden AT-cable. Heat shrink tubing included. Double clamps at each end of the cable are required. SEL-Bus Power Supply Unit. Converts 12V or 24V to 42V Art. No. Parts included Power Supply Unit (PSU), main switch/fuse, SEL-Bus cables and terminals, power cables Control Pack Art. No. Parts included 532-815-70 Control pack for CXe25 Motor Control Unit (MCU), push buttons, and CXe45 SEL-Bus cables and terminals Learn about SEL-Bus: www.seldenmast.com/products/electric-installations/

Abrir o catálogo na página 6

Selden Mast AB, Sweden Tel +46 (0)31 69 69 00 e-mail info@seldenmast.com Selden Mast Limited, UK Tel +44 (0)1329 50 40 00 e-mail info@seldenmast.co.uk Selden Mast Inc., USA Tel +1 843-760-6278 e-mail info@seldenus.com Selden Mast A/S, Denmark Tel +45 39 18 44 00 e-mail info@seldenmast.dk Selden Mid Europe B.V., Netherlands Tel +31 (0)111-698 120 e-mail info@seldenmast.nl Selden Mast SAS, France Tel +33 (0)251 362 110 e-mail info@seldenmast.fr KEELBOATSYACHTS The Selden Group is the world’s leading manufacturer of mast and rigging systems in carbon and aluminium for dinghies, keelboats and...

Abrir o catálogo na página 7