Catálogos >
SEACON (Europe) >
SCE-DS-0005 SCE Testing Facilities Rev 2

SCE-DS-0005 SCE Testing Facilities Rev 2
1 / 3Páginas

Excertos do catálogo

SCE-DS-0005 SCE Testing Facilities Rev 2 - 1

pb^`lk (europe) LTD TEST FACILITY pb^`lk (europe) Ltd Test Facility DESCRIPTION With an increase in the demand for customers to utilise our in-house testing facility, the following document compiles a list of testing that we can perform at pb^`lk (europe) Limited which can be utilised by a third party on a daily or part daily basis with full technical assistance as back up if required. KEY FEATURES · Hydrostatic pressure tests up to 10,000 psi · Hydrostatic cycling on all pressure vessels · Most test regimes catered for · Competitive hourly or daily rates · Full quotations available on request · Full test report writing service MECHANICAL · Due to the precision tolerances required to ensure reliable connector operation, pb^`lk (europe) Ltd employs a wide and varied array of mechanical inspection equipment including:Brown & Sharp 2D Digital Height Gauge Brown & Sharp Shadowgraph/Profile Projector Digital Surface Finish Gauge In addition to this a varied selection of Micrometers, Bore Micrometers, Digital Vernier Callipers and Thread Gauges are also available. pb^`lk (europe) Ltd Seacon House, Hewett Road, Gapton Hall Industrial Estate, Great Yarmouth, NR31 0RB, United Kingdom TEL: +44 (0) 1493 652733 FAX: +44 (0) 1493 652840 E-Mail: info@seaconeurope.com Website: www.seaconeurope.com

Abrir o catálogo na página 1

SCE-DS-0005 SCE Testing Facilities Rev 2 - 2

ELECTRICAL/ ELECTRONIC As a connector manufacturing company the electrical reliability of our connectors is paramount and to ensure this pb^`lk (europe) Ltd operates a large array of multimeters and insulation resistance testers (operating from 50 VDC to 5000 VDC). Also used are high accuracy 4-wire ohmmeters, Oscilloscope, PSU's and an RCL meter operating from 50Hz to 100KHz. HYDROSTATIC Most of the pressure testing required by SCE is performed in our own facility located onsite with a total of three pressure vessels. The first of these operates in the 0-2,000 psi range and operates...

Abrir o catálogo na página 2

SCE-DS-0005 SCE Testing Facilities Rev 2 - 3

molar`q==a^q^pebbq Our second and third vessels operate at upto 10,000 psi and both have an internal diameter of 4 inches. One unit has a depth of 7 inches while the second has a depth of 36 inches, as with the through lid testing facility as described before. Note we can offer pressure cycling manually or automatically on all pressure vessels. Automatic pressure cycling unit complete with chart recorder In addition to this we have various jigs and fixtures for pressure testing specific assemblies and also helium/nitrogen leak testing. QUALITY · pb^`lk (europe) Ltd operate a Quality...

Abrir o catálogo na página 3