Catálogos >
Sea Hawk >
TROPIKOTE EX

TROPIKOTE EX
1 / 3Páginas

Excertos do catálogo

Origination date: January 2019 Technical Data Sheet Aggressively Combats All Fouling Hard Modified Epoxy Antifouling • 60% cuprous oxide in all colors • Better rollability • Extremely hard durable finish This product may not be sold or applied in the United States. Please check with your respective Country for regulatory requirements regarding sale and use of the product. PRODUCT DESCRIPTION Sea Hawk’s top-of-the-line hard antifouling paint contains 60% cuprous oxide. This multi-season bottom paint aggressively combats ALL types of fouling and reduces hull maintenance with year-round, trouble free performance. Superior adhesion to fiber-glass, wood and steel hulls makes it ideal for any vessel. Use for over coating, without the fear of lifting. PRODUCT INFORMATION Colors: Size Available: Gallon Copper Content: Volume Solids: Shipping Weight: Typical Film Thickness: Pleasure craft: 3.0 mils dry film thickness (DFT) per coat. (5.0 mils wet film thickness (WFT)) Commercial marine: 4.0-5.0 mils DFT per coat by spray application (6.7-8.0 mils WFT) Recommended Coats: 2 (+1 at the waterline and other high-wear areas) Theoretical Coverage: 320 Sq. Ft./Gal. @ 3.0 mils DFT FEATURES AND BENEFITS • 60% is the Highest Copper Content Available on the Market • May use on fast or slow moving vessels • Colors consistent in every gallon • May be applied over most modified epoxy antifoulants • One year certified applicator warranty against growth APPLICATION CONTROLS Method: This product may be applied by airless and conventional spray, solvent-resistant rollers and brushes. (Page 1 of 3) NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.523.73

Abrir o catálogo na página 1

Technical Data Sheet PLEASURE CRAFT DRYING TIME IN HOURS Substrate Temp. Minimum Time Maximum Time Minimum Launch Please contact your Sea Hawk representative for Commercial Marine application and overcoating dry times. Note: If the vessel is launched, and then rehauled, air exposure should be limited to 72 hours. If out of the water longer than 72 hours, TROPIKOTE EX will oxidize and lose its antifouling effectiveness. Therefore, an additional coat of TROPIKOTE EX is recommended after 72 hours of air exposure from haul out time. SURFACE PREPARATION Paint only clean, dry surfaces. Remove all...

Abrir o catálogo na página 2

Technical Data Sheet APPLICATION Mixing: TROPIKOTE EX antifouling paint contains a high concentration of copper and may have settled in transit. Product must be thoroughly mixed with power mixer/shaker until uniform. Induction Time: Not Applicable Thinning: If necessary, maximum 10%Sea Hawk 2033, 2035 Cleaning: Sea Hawk 2033, 2035, Xylene Pot Life: Not Applicable Brush/Rolling: Solvent Resistant Roller Cover 3/8” pile (nap), smooth to medium. Prewash roller cover to remove loose fibers prior to use. Airless Spray: Minimum 33:1–2 GPM ratio pump; 0.017”-0.026” orifice tip; 3/8” ID...

Abrir o catálogo na página 3