Catálogos >
Sea Hawk >
TranShield? Transducer Antifouling Paint

TranShield? Transducer Antifouling Paint
1 / 2Páginas

Excertos do catálogo

TranShield? Transducer Antifouling Paint - 1

TRANSHIELD Solvent-Free Transducer Antifoulant 1565 ANTIFOULING FORMULATED FOR TRANSDUCERS WATER BASED PRODUCT SAFE FOR THE ENVIRONMENT • No Sonar Signal Interference • Durable, Water-Based Formula • Safe on Plastic Surfaces Benefits VS. Competition General Description Hard ablative, multi-seasonal, solvent free antifoulant for transducers. Provides protection against algae, barnacles, annelids, tunicates, bryzoa, hydroids, zebra mussels and other fouling organisms. Transhield is abrasion resistant for scrubbing, trailering and dry storage. Reduces paint buildup. This product may only be used to treat the surfaces of transducers. This product is intended for both salt and fresh water use. Transhield applies easily and dries quickly. Transhield is an antifouling paint in a high-technology vehicle that withstands frequent trailering, beaching and launching. Transhield should not be used on aluminum. Product Information Colors: Finish/Sheen: Converter: Copper Content: Volume Solids: Solids by Weight: Mix Ratio: Shipping Weight: Flash Point: VOC: Film Thickness: Recommended Coats: Theoretical Coverage: Black Semi-Gloss One Pack 58% 44% (±2%) 76 One Pack 1.3 lbs./ ½ pint N/A 113 Grams/Liter 5 mils wet equals 2.2 dry per coat 2 240 Sq.in. ½ pt @ recommended film thicknessRODU • • • • Formulated Specifically for Transducers Highest Grade of Cuprous Oxide Available (More Potent Active Ingredient) Harder Ablative Finish (Lasts Longer on Higher Speed Vessels) Consistent Viscosity = Better Flow and Rolling Ability in Every Gallon CT INRMATIO Application Details Method: Induction/ Sweat-in Time: Thinner: Cleaner: Pot Life: Brush, roller or spray Not Applicable Water Water Not Applicable Overcoating Interval Substrate Temp. 41°F (5°C) 73°F (23°C) 95°F (35°C) Drying Time (Hrs) Touch Min. Max. Launch N/A N/A N/A N/A 2 Hr 1 Hr N/A 12 Hr 1 Hr 1 Hr N/A 12 Hr Consult your Sea Hawk Representative for the system best suited for surfaces to be protected. NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 800.528.0997 • 727.523.8053 • FAX 727.523.7325 www.SeaHawkPaints.com

Abrir o catálogo na página 1

TranShield? Transducer Antifouling Paint - 2

TRANSHIELD Solvent-Free Transducer Antifoulant 1565 Limitations Application Apply in good weather when air and surface temperatures are above 50°F (10°C). Surface temperature must be a least 50°F (10°C) above dew point. For optimum application properties, bring material to 70-80°F (21-27°C) temperature range prior to mixing and application. Unmixed material (in closed containers) should be maintained in protected storage between 40° and 100°F (4-38°C). Apply by brush, roller or spray. Apply 5 mils wet, which will yield 2.2 mils dry per coat. EQUIPMENT Brush: China Bristle Roller: Solvent...

Abrir o catálogo na página 2