Catálogos >
Sea Hawk >
sHAWKocon?

sHAWKocon?
1 / 2Páginas

Excertos do catálogo

SHAWKOCON Underwater Primer Adhesion Promoter Underwater Primer Anti-Corrosive Primer Compatible Over Existing (Non-Vinyl) Antifoulants No Overcoat Window Improves and Promotes Adhesion Prevents Galvanic Corrosion TBT Sealer Product Description Shawkocon is a fast drying, general purpose below the waterline anti-corrosive primer. Its‟ physical properties and excellent adhesion characteristics provide an easy to use multi-functional primer: Conversion/Sealer coating over tributyl tin based paints or any unknown well-adhered antifoulant paint to prevent cracking and promote adhesion of a new antifouling paint. Barrier/Sealer coating over incompatible or unknown antifoulants to prevent cracking and promote adhesion of a new antifouling paint. An excellent barrier coat to reduce pitting of underwater metals from galvanic corrosion on running gear, lower units of outboards, keels, and I/O‟s Product Information Color: Gray Metallic Finish/Sheen: Matte A novel single component, fast drying anti-corrosive primer for underwater hull applications to fiberglass, steel, aluminum and wood. A useful sealer primer used over existing anti-fouling paints (excluding vinyl types) to enhance the adhesion of a freshly applied antifouling. May be used to seal unknown anti-fouling paints of provided the existing antifouling is still intact and free of all surface imperfections. Ideally used as a seal coat over existing TBT anti-fouling paints to accept non-TBT types without the typical softening that normally occurs. When used as a metal primer on steel, Shawkocon prevents corrosion and on aluminum prevents oxidation or metal fatigue. May be used on all underwater metal surfaces including outboards and I.O units with or without existing intact paint. No over coat window provided Designed to use as part of a multi-coat system on all underwater hull metal surfaces in the pleasure craft and commercial marine industry. Typical Shelf Life: 2 Years Voume Solids: 39% (±2%) Solids by Weight: 49.6% Mix Ratio: One Pack Method: This product may be applied by airless and conventional spray, solvent resistant rollers and brushes. Shipping Weight: 8-9 Lbs./Gal. Dry Times and Overcoating Intervals: Application Controls Substrate Temp. Overcoating Time (self) Minimum Solvent Based Antifoulings Minimum Water based Antifoulings Minimum Typical Film Thickness: 2.0-2.5 mils dry film thickness (DFT) per coat, (5.1-6.4 Mils wet film thickness (WFT)) Recommended Coats: As a sealer, 1 coat. AS a metal primer 3-4 coats. Flash Point: 80°F VOC: 420 Grams/Liter Theoretical Coverage: 250 Sq.Ft./GL @ 2.5 mils DFT Please contact your Sea Hawk representative for Commercial Marine application and overcoating dry times. NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.523.7325 www.SeaHawkPaints.com

Abrir o catálogo na página 1

SHAWKOCON Surface Preparation Paint only clean, dry surfaces. Remove all grease, oil, wax, or other foreign material by solvent or detergent washing. (SSPC-SPI) Aluminum and Steel Vessels: Sea Hawk Shawkocon Primer SH984 is normally used as part of paint systems for below the waterline. Shawkocon Primer must be applied over properly cleaned metal surfaces, free of all surface contamination. Some areas may need to be cleaned in accordance with SSPC-SP-1 Solvent Cleaning using Sea Hawk S-80 to ensure all oils, grease and other contaminants are removed. Please refer to additional data below....

Abrir o catálogo na página 2