Catálogos >
Sea Hawk >
SHARKSKIN™ Technical Data Sheet_2019

SHARKSKIN™ Technical Data Sheet_2019
1 / 2Páginas

Excertos do catálogo

SHARKSKIN™ Technical Data Sheet_2019 - 1

Revision date: April 2019 Technical Data Sheet Modified Epoxy 6100 Series Heavy-Duty Protection • Hard Modified Epoxy • Effective Copper Content • Premium Antifouling Protection in Both Freshwater and Saltwater PRODUCT DESCRIPTION Sharkskin is Sea Hawk’s traditional PRODUCT INFORMATION Colors: Black 6145, Blue 6142, Dark Blue 6140, Red 6141, Green 6143 hard-modified epoxy paint. Sharkskin Finish/Sheen: Semi-gloss aggressively combats all types of marine fouling including barnacles, sea Copper Content: 45.2% (1013 g/l) all colors grass, green weed and other fouling organisms in fresh and saltwater. Sharkskin can be applied over most antifouling coatings. Shipping Weight: Black 18.23 Lbs/Gal (8.26 kl/Gal) Blue 18.51 Lbs/Gal (8.39 kl/Gal) Dark Blue 18.57 Lbs/Gal (8.42 kl/Gal) Red 18.73 Lbs/Gal (8.49 kl/Gal) Green 18.68 Lbs/Gal (8.47 kl/Gal) *All colors are not available in all states Flash Point: 80°F (27°C) VOC: 365 Grams/Liter Typical Film Thickness: Pleasure craft: 3.1 mils (78.7 µ) dry film thickness (DFT) per coat, (5.0 mils (127 µ) wet film thickness (WFT)), 2 coats on entire hull and a 3rd at the waterline and other high wear areas. Pleasure craft (California/Reduced CU2O Leach Rate Application): 2.2 mils (55.9 µ) dry film thickness (DFT) per coat, (3.6 mils (91.44 µ) wet film thickness (WFT)), 2 coats on entire hull. Theoretical Coverage: 320 sq.ft./gal. at 3.1 mils (78.4 µ) dry film thickness FEATURES & BENEFITS • Most effective copper release rate • Highest grade of cuprous oxide available (more potent active ingredient) • Better color consistency for color matching • Consistent viscosity = better flow and rolling ability (Page 1 of 2) NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.5

Abrir o catálogo na página 1

SHARKSKIN™ Technical Data Sheet_2019 - 2

Technical Data Sheet Cleaning: Clean all equipment immediately after use with Sea Hawk 2033. It is a good practice to periodically flush out spray equipment during the course of the day. Frequency should depend upon amount sprayed, temperature, elapsed time including delay, etc. • May be applied over other modified epoxy antifoulant paints (See Compatibility Chart) APPLICATION DETAILS Method: Brush, roller or spray Safety: Prior to use, obtain and consult the “Safety Data Sheet” for this product for health and safety information. Read and observe all precautionary notices on container...

Abrir o catálogo na página 2