Catálogos >
Sea Hawk >
Sharkskin Modified Epoxy

Sharkskin Modified Epoxy
1 / 2Páginas

Excertos do catálogo

SHARKSKIN Heavy-Duty Protection Hard Modified Epoxy Effective Copper Content Modified Epoxy For Fresh or Salt Water 6100 Series Product Description Sharkskin is Sea Hawk's traditional 45.2% copper-based hardmodified epoxy paint. Sharkskin aggressively combats all types of marine fouling including barnacles, sea grass, green weed and other fouling organisms in fresh and saltwater. Sharkskin can be applied over most antifouling coatings. Benefits VS. Competition Highest Grade of Cuprous Oxide Available (More Potent Active Ingredient) Hard, modified epoxy Product Information Better Color Consistency for Color Matching (Less Shading Issues) Consistent Viscosity = Better Flow and Rolling Ability in Every Gallon May Be Applied Over Other Modified Epoxy Antifoulant Paints (See Compatibility Chart) Colors: Red 6141, Blue 6142, Green 6143 Black 6145 Finish/Sheen: Semi-Gloss Converter: One Pack Copper Content: 45% All Colors Method: Brush, Roller or Spray Voume Solids: 62% (±2%) Induction Time: Not Applicable Thinner: Sea Hawk 2033 Solids by Weight: Application Details Mix Ratio: One Pack Cleaner: Sea Hawk 2033 Shipping Weight: 22-24 Lbs./Gal. Pot Life: Not Applicable Flash Point: 80°F VOC: 330 Grams/Liter Film Thickness: 5 mils wet equals 3.1 dry per coat Recommended Coats: 2 Full Coats with 3 at the water line a and other high wear areas Theoretical Coverage: 320 Sq.Ft./Gl @ recommended film thickness Overcoating Interval Drying time in Hours Substrate Temp. Touch Min. Max. Launch 73°F (23°C) 1 Hr 2 Hr N/A 12 Hrs 95°F (35°C) 1 Hr 1 Hr N/A 12 Hrs —————————————————————————————— Consult your Sea Hawk Representative for the system best suited for surfaces to be protected. NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.523.7325 www.SeaHawkPaints.com

Abrir o catálogo na página 1

SHARKSKIN Modified Epoxy APPLICATION Apply by brush, roller or spray. Apply 5 mils wet, which will yield 3.1 mils dry per coat. 6100 Series Equipment Brush: China Bristle Roller: Solvent Resistant Roller Cover 3/8" pile smooth to medium. Prewash Roller Cover to remove loose fibers prior to use. Airless Spray: Minimum 33:1 –1 GPM ratio pump; “0.0170.026" orifice tip; 3/8" ID high-pressure material hose; 90 PSI line pressure; 60 mesh filter. Thinning If thinning is necessary, thin up to a maximum of 10%, with Sea Hawk 2033 only. Cleanup Clean all equipment immediately after use with Sea Hawk...

Abrir o catálogo na página 2