Catálogos >
Sea Hawk >
Mission Bay CSF Self-Polishing Nano-Based Technology

Mission Bay CSF Self-Polishing Nano-Based Technology
1 / 2Páginas

Excertos do catálogo

Mission Bay CSF Self-Polishing Nano-Based Technology - 1

PREMIUM YACHT FINISHES Nano-Based Technology Copper-Free, Solvent-Free and Tin-Free Environmentally Friendly UV Reactive Biocide Mission Bay CSF Self-Polishing Nano-Based Technology 4500 Series Product Description Copper and Solvent-Free (CSF) ablative, self-polishing antifou-lant. Enhanced, Nano-Based Technology copolymer, biocide release mechanism. Prevents coating buildup and reacts with UV light. Mission Bay may be used on aluminum hulls without the use of a traditional barrier coat system. Product Information Colors: Red 4501, Blue 4502, Green 4503 Benefits VS. Competition • Over 80% Lower VOC's than Solvent-Based Paint • Safe for Aluminum Hulls • More Vibrant Colors • No Mud Cracking • May Be Applied Over Other Ablative Antifoulant Paints (See Compatibility Chart) Finish/Sheen: Converter: Copper Content: Voume Solids: Solids by Weight: Mix Ratio: Shipping Weight: Flash Point: VOC: Film Thickness: Recommended Coats: Theoretical Coverage: Semi-Gloss One Pack 0% All Colors 55% (±2%) 65% One Pack 14-15 Lbs./Gal. N/A 150 Grams/Liter 5 mils wet equals 2.75 dry per coat 3 Full Coats on Entire Hull 320 Sq.Ft./recommended film thickness Application Details Method: Brush, Roller or Spray Induction Time: Not Applicable Thinner: Water Cleaner: Water Pot Life: Not Applicable Overcoating Interval Drying time in Hours Substrate Temp. Touch Min. Max. Launch Consult your Sea Hawk Representative for the system best suited for surfaces to be protected.

Abrir o catálogo na página 1

Mission Bay CSF Self-Polishing Nano-Based Technology - 2

Sea Hawk PREMIUM YACHT FINISHES Mission Bay CSF Self-Polishing Nano-Based Technology 4500 Series APPLICATION Apply by brush, roller or spray. Apply 5 mils wet, which will yield 2.75 mils dry per coat. Equipment Brush: China Bristle Roller: Solvent Resistant Roller Cover 3/8" pile smooth to medium Prewash Roller Cover to remove loose fibers prior to use. Airless Spray: Minimum 33:1 -2 GPM ratio pump; "0.0170.026" orifice tip; 3/8" ID high-pressure material hose; 90 PSI line pressure; 60 mesh filter. Thinning If thinning is necessary, thin up to a maximum of 10%, with water. Cleanup Clean all...

Abrir o catálogo na página 2