Catálogos >
Sea Hawk >
Islands 99 plus

Islands 99 plus
1 / 2Páginas

Excertos do catálogo

Revision date: April 2019 Technical Data Sheet High Strength Antifouling Based on a special synthetic resin with balanced biocidal properties to give long-term antifouling • Low copper concentration • Tin Free • Long term resistance to weed and animal fouling PRODUCT DESCRIPTION PRODUCT INFORMATION This product may not be sold or applied in the United States. Please check with your respective country for regulatory requirements regarding sale and use of the product. Black, Blue Typical Shelf Life: Volume Solids: Shipping Weight: Flash Point: Islands 99 plus is a tin free antifouling paint with polishing action in service and long protection against marine organisms. The specific vehicle composition provides long lasting antifouling and polishing action. Film Thickness: 4-7 mils (101.6-177.8 µ) wet equals 2.2 - 3.9 mils (55.88-99.06 µ) dry per coat Recommended Coats: 2 if applied by brush Coverage (for DFT): 230 - 408 sq. ft./gal (21.37-37.9 m2) FEATURES AND BENEFITS • Highest grade of cuprous oxide available • Better color consistency • Compatible over most existing antifouling paints APPLICATION DETAILS Method: spray, rollers and brushes Thinner: 2033 Cleaner: 2033 Dry Times and Overcoating Intervals: Pleasure Craft Drying time in Hours Substrate Temp. Minimum Launch Time 12 hours 12 hours Consult your Sea Hawk Representative for the system best suited for surfaces to be protected. NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.523.732

Abrir o catálogo na página 1

Islands 99 plus 9900 Series Technical Data Sheet LIMITATIONS Apply in good weather when air and surface temperatures are above 50° F (10°C). Surface temperature must be a least 10°F above dew point. For optimum application properties, bring material to 70-80° F (21-27°C) temperature range prior to mixing and application. Unmixed material (in closed containers) should be maintained in protected storage between 40° and 100° F (4-38° C). Prolonged atmospheric exposure of this product may detract from performance. Technical and application data herein is for the purpose of establishing a...

Abrir o catálogo na página 2