Catálogos >
Sea Hawk >
ISLANDS 44 PLUS HARDER

ISLANDS 44 PLUS HARDER
1 / 3Páginas

Excertos do catálogo

ISLANDS 44 PLUS HARDER™ Technical Data Sheet Revision date: July 2019 Tin-Based Antifouling 1000H Series TBT-BASED PAINT (NON U.S.) Self Cleaning Copolymer Antifoulant • The Highest Level of Protection Available • Multi-Season Protection for the Harshest Environments in the World • No Other Comparable Paint on the Market PRODUCT DESCRIPTION PRODUCT INFORMATION Islands 44 Plus HARDER was developed for the harshest tropical environments in the world. Islands 44 Plus HARDER is a multi-seasonal self-polishing paint. It has a high load of copper and tin that will ensure maximum protection against marine growth. Colors: Black 1005H, Blue 1002H, Green 1234H, Teal 1235H, Red 1001H, Dark Blue 1030H This product may not be sold or applied in the United States. Please check with your respective Country for regulatory requirements regarding sale and use of the product. Finish/Sheen: Gloss Converter: One Pack Copper Content: 34.59% Tributyltin Methacrylate: 10.53% Tributyltin Oxide: .45% Mix Ratio: One Pack Shipping Weight: 14.5 lbs. (6.57 kg)/gallon Flash Point: 80° F (27° C) VOC: 400 Grams/Liter Film Thickness: 5 mils (127 µ) wet equals 3.45 mils (87.63 µ) dry per coat Recommended Coats: 2 heavy coats on entire hull and a 3rd at waterline and other high wear areas Theoretical Coverage: 400 sq.ft. (37.16 m2)/gal. @ recommended film thickness FEATURES & BENEFITS • Self-cleaning copolymer with high load of tin (TBT) and copper • The only tin (TBT) paint available on the market • Highest level of antifoulant protection available • Highest quality grade of cuprous oxide available (more potent active ingredient) APPLICATION DETAILS Method: Brush, roller or spray Induction/Sweat-in Time: Not applicable Thinner: Sea Hawk 2031 (Page 1 of 3) NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.523.73

Abrir o catálogo na página 1

ISLANDS 44 PLUS HARDER™ Technical Data Sheet Cleaner: Sea Hawk 2031 Pot Life: Not applicable Overcoating Intervals: Substrate Temp. Overcoating Time Consult your Sea Hawk Representative for the system best suited for surfaces to be protected. SURFACE PREPARATION Paint only clean, dry surfaces. Remove all grease, oil, wax, or other foreign material by solvent or detergent washing. (SSPC-SPI) Compatibility: For pleasure craft applications, please refer to our Sea Hawk Compatibility Chart to ensure compatibility when applying Islands 44 Plus HARDER antifouling paint over existing bottom paint....

Abrir o catálogo na página 2

ISLANDS 44 PLUS HARDER™ Technical Data Sheet application procedures. As application, environmental and design factors can vary significantly due care should be exercised in the selection, verification of performance, and use of the coating. APPLICATION DATA Mixing: Islands 44 Plus Harder antifouling paint contains a moderate concentration of copper oxide and may have settled in transit. Product must be thoroughly mixed with power mixer/shaker until uniform. Induction Time: Not Applicable Thinning: If necessary, maximum 10% Sea Hawk 2031 Reducer. Cleaning: Sea Hawk 2031 Pot Life: Not...

Abrir o catálogo na página 3