Catálogos >
Sea Hawk >
Island Prime Sealer

Island Prime Sealer
1 / 2Páginas

Excertos do catálogo

ISLAND PRIME Barrier Coat & Adhesion Promoter Protects the Hull from Moisture Infusion (MVT) Adhesion Promoter 100% Compatible with any TinBased Coating No Overcoat Window Sealer Barrier Primer 1283 Product Description Sealer barrier primer recommended for use over previous tinbased antifoulants prior to recoating to insure excellent adhesion and to seal previous coating. Island prime is also an excellent moisture vapor transmission (MVT) barrier coat to protect the hull against moisture damage. Benefits VS. Competition Compatible Over Existing Antifoulants Protects Hull from Moisture No Overcoat Window Improves Adhesion Product Information Colors: Off White Finish/Sheen: Flat Converter: One Pack Copper Content: N/A Voume Solids: 31% (±2%) Solids by Weight: Application Details Method: Brush, Roller or Spray Induction Time: Not Applicable Thinner: Sea Hawk 2031 or 2033 Cleaner: Sea Hawk 2031 or 2033 Pot Life: Not Applicable Overcoating Interval Mix Ratio: One Pack Shipping Weight: 10.29 Lbs./Gal. Substrate Temp. Touch Min. Max. Flash Point: 80°F 73°F (23°C) 1 Hr N/A VOC: 420 Grams/Liter Film Thickness: 2 Mils wet Recommended Coats: 1 Drying time in Hours 2 Hr Launch 12 Hrs Consult your Sea Hawk Representative for the system best suited for surfaces to be protected. Theoretical Coverage: 802 Sq.Ft./Gl @ recommended film thickness NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.523.7325 www.SeaHawkPaints.com

Abrir o catálogo na página 1

ISLAND PRIME Sealer Barrier Primer APPLICATION Apply by brush, roller or spray. Apply 6 mils wet, which will yield 2 mils dry per coat. 1283 Equipment Brush: China Bristle Roller: Solvent Resistant Roller Cover 3/8" pile smooth to medium. Prewash Roller Cover to remove loose fibers prior to use. Airless Spray: Minimum 28:1 ratio pump; “0.021-0.026" orifice tip; 3/8" ID high-pressure material hose; 90 PSI line pressure; 60 mesh filter. Thinning Limitations If thinning is necessary, thin up to a maximum of 10%, with Sea Hawk 2031 or 2033. Apply in good weather when air and surface...

Abrir o catálogo na página 2