Catálogos >
Sea Hawk >
Gel Coat

Gel Coat
1 / 2Páginas

Excertos do catálogo

ISO/NPG Series Premium Marine Grade Gel Coat Chemical Resistant Patch Existing Gelcoat, New Construction Fiberglass Repair Product Description Sea Hawk Gelcoat is a premium quality isophthalic NPG gelcoat formulated to meet rigid requirements in the boating, transportation, and sanitary applications. Meets American National Standard for plastic bath tubs, show receptors, and shower stalls. (ANSI Z124.1, .2005, Sec. 6.1). May be used to patch, re-gelcoat, or new application. Common uses include boats, RV’s, showers, tubs, pools, and more. Premium Marine Grade Gelcoat Ready to Use, Easy to Spray, Sag Resistant High Gloss Retention Excellent Weatherability and Chemical Resistance Resistance to water blistering Application Controls Product Information Colors: White-8115, Black-2017, Jade Mist Green-4089 Sea Foam-4256, Flag Blue,-5002, Ice Blue-5004, Marlin Blue-5011, Teal-5328, Clear-6000, Orange Tooling-7000, Toreador Red7161, Vivid Red-7367, Matterhorn White-8003, Whisper Gray8035, Fighting Lady Yellow-9093, Federal Yellow-9298, Sizes: Quart, Gallon, 5 Gallon Pail Finish/Sheen: Gloss Method: This product may be applied by airless and conventional spray, solvent resistant rollers and brushes for small areas only. Dry Times and Overcoating Intervals In Hours: Substrate Temp. Sand/ Compound Shipping Weight: 9-11 Lbs./Gal. (Depending on Color) Do not apply directly over painted surface. Catalyzing with MEKP: VOC: 35-42% Typical Film Thickness: 18 ±2 mils. Catalyst Level (MEKP): 1.2% Minimum - 3.0% Maximum Gel Time at 1.8% MEKP Catalyst @ 77°F: 10-17 minutes Theoretical Coverage: Approx. 48-52 Sq.Ft./Gal. @ typical film thickness Storage: Avoid prolonged exposure at temperatures above 85°F and to direct sunlight. Increased storage temperatures will negatively effect shelf life. Store in a cool place. Shelf Life: 270 Days when stored under cool, dry conditions. NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.523.7325 www.SeaHawkPaints.com

Abrir o catálogo na página 1

ISO/NPG Series Gel Coat Preparation Stir container thoroughly before using. Add any additives such as Sea Hawk 7125 MEK Gelcoat Thinner, Sea Hawk Patch Aid 8185, or colorants (tints) prior to catalyzing with MEKP Catalyzer. Surface Preparation Gelcoat over clean, dry surfaces. Remove all grease, oil, wax, or other foreign material by using Sea Hawk S-80 Wax N Grease Killer. All surfaces must be sanded. Do not apply directly over paint. Additives Patch Aid 8185: Add 25-33% Sea Hawk Patch Aid 8185 when applying gelcoat for small repairs, to improve the working properties of traditional...

Abrir o catálogo na página 2