Catálogos >
Sea Hawk >
BiocopTF

BiocopTF
1 / 3Páginas

Excertos do catálogo

Revision date: March 2014 Technical Data Sheet Advanced Dual Biocide Maximum Performance for All Vessels • Maximum Protection Available • PL3 Advanced Dual Biocide Technology • Harder, Self-Polishing Boosted Ablative for Longer Life • Multi-Season Performance • TBT-Free– Lloyd‟s Registered PRODUCT DESCRIPTION Biocop TF was developed as an alternative to tin-based antifouling paints to protect against the harshest marine environments. Using the newest biocide technology, a revolutionary polymer binder system “PL3” produces an engineered dual biocide release that leaves no harmful effects on the environment. The result is a multi-season self-polishing paint that provides equivalent protection to tin-based formulas. PRODUCT INFORMATION Colors: Red 1201-1, Light Blue 1202-1, Black 1205-1, Dark Blue 1230-1, Grey 1231-1, Green 1234-1, Teal 1235-1 Finish/Sheen: Semi-Gloss Biocide Content: 4.5% Copper Content: 42% (all Colors) Volume Solids: 62% +\- 2% Solids by Weight: 85 Shipping Weight: 17-18 Lbs./Gal. Flash Point: 100°F VOC: 398 Grams/Liter Typical Film Thickness: Pleasure Craft: 3.0 mils dry film thickness (DFT) per coat, (5.0 mils wet film thickness (WFT)) Commercial Marine: 4.0-5.0 mils DFT per coat by spray application (7.0- 8.0 Mils WFT) Recommended Coats: 2 heavy coats on entire hull and 3 at waterline and other high wear areas Theoretical Coverage: 331 Sq.Ft./Gal. @ 3.0 mils DFT FEATURES & BENEFITS • Advanced Dual Biocide PL3 Release Technology for Longer Life • Harder, Self-Polishing Polymer Binding System • Highest Grade of Cuprous Oxide Available • Better Color Consistency for Color Matching • Provides Maximum Fouling Protection as TBT Type Products • Lloyd‟s Registered (TBT-FREE) (Page 1 of 3) NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.523.7325 • www.SeaHawkPaints.com

Abrir o catálogo na página 1

Technical Data Sheet APPLICATION CONTROLS Method: This product may be applied by airless and conventional spray, solvent resistant rollers and brushes. Dry Times and Overcoating Intervals: Substrate Temp. Temp F˚ (C˚) Overcoating Time Please contact your Sea Hawk representative for Commercial Marine application and overcoating dry times. SURFACE PREPARATION Paint only clean, dry surfaces. Remove all grease, oil, wax, or other foreign material by solvent or detergent washing. (SSPC-SPI) Compatibility: For pleasure craft applications, please refer to our Sea Hawk Compatibility Chart to ensure...

Abrir o catálogo na página 2

Technical Data Sheet Brush/Rolling: Solvent Resistant Roller Cover 3/8” pile (nap), smooth to medium. Prewash roller cover to remove loose fibers prior to use. Airless Spray: Minimum 33:1–2 GPM ratio pump; “0.017-0.026” orifice tip; 3/8” ID high-pressure material hose; 90 PSI line pressure; 60 mesh filter. Conventional Spray: Please contact your Sea Hawk representative for more specific information. Safety: Prior to use, obtain and consult the “Material Safety Data Sheet” of this product for health and safety information. Read and observe all precautionary notices on container labels....

Abrir o catálogo na página 3