Brochure ATEX EN
1 / 16Páginas

Lighting solutions for ATEX zones 1, 2, 21 & 22

Steelworks, ArcelorMittal, Dunkirk, France. Airplane painting hall, Airbus, Hamburg, Germany.

Sammode has designed a range of lighting solutions dedicated to ATEX areas based on our extensive experience and knowledge of the specific nature of our clients’ businesses (chemical, petrochemical, onshore and offshore installations, cereals processing and storage...). Our luminaires are robust, resistant, made to last. Robustness We selected a wide range of high-value materials: • Inox 304L and 316L for all external metal features • Borosilicate glass, polycarbonate or coextruded polycarbonate/methacrylate to certify the resistance of the luminaire in high chemical, corrosive and abrasive...

Congorep oil rig, Gulf of Guinea, Republic of Congo

Selected protection methods by Sammode Increased safety (e): Consisting of applying measures to avoid, with a high safety coefficient, the possibility of high temperatures and appearances of arcs or sparks inside the electric material in normal service. Encapsulation (m): The components that could ignite an explosive atmosphere with sparks or heating are enclosed in resin so the explosive atmosphere does not enter our sealed luminaires. No spark’s risk (n): Electrical equipment that is designed to make it impossible, in normal operation, for any external source of ignition (spark, hot...

Because of their aggressiveness, ATEX conditions usually result in premature deterioration of materials that could lead to the spontaneous breakage of equipment. For this reason and with more than 40 years of experience in those environments (corrosive or saline environments, UV etc.) Sammode offers a large selection of solutions to face these demanding conditions. A partner for your project Sammode's expert teams are committed and flexible and offer you their support all along your project. A long-term investment We take into account our product life cycle from development to...

Selection guide Our lighting solutions for ATEX zones combine lighting comfort and exceptional durability thanks to the construction principles of the housing and to specific adequate components. With this selection guide you can choose the right product depending on the operating environment, your installation and use constraints. Our team is also available to help you.

ATEX zones Zone 1 Environment Severe Key features Ease of impIementation Durable and maintainable luminaire, resistant to external UV-rays Very good resistance to oils and hydrocarbons Principal part numbers Light ouput (Im) 1150 2300 4250 2100 4250 Designation ALD13312H840 POME BRS 213-1O ALD13314H840 POME BRS 213-1O ALD13315H840 POME BRS 213-1O ALD133 22H840 POME BRS 213-10 ALD133 24H840 POME BRS 213-1O Options Specifications Colour temperature: 6000K High performance and removable driver and LED modules Service life @Ta max : 50 000h L80B50 Housing: Polycarbonate PO Heat management...

ATEX zones Zone 1 Environnement Extreme Resistant to agressive chemical environments High-intensity vibration resistance Durable and maintainable luminaire Principal part numbers High performance and removable driver and LED modules Service life @Ta max: 50 000h L80B50 Housing: Polycarbonate Coextruded PO/PMMA PO Heat management POME Optic Optical diffuser Cable entries: 1 cable gland in black polyamide 08-13 mm 010-15 mm 2 cable glands in black polyamide 010-15 mm Colour temperature 113 116 Control gear constant current driver Connection: 5-point terminal block for phase balancing...

ATEX zones Zone 2 - 21/22 Environment Severe Durable and maintainable luminaire, resistant to external UV-rays Very good resistance to oils and hydrocarbons Principal part numbers Light output (Im) 1150 2775 4625 5550 9250 Housing: Polycarbonate Light source 830 850 Heat management PO Optic High performance and removable driver and LED modules Service life @Ta max: 50 000h L80B50 Optical diffuser Cable entries: 1 cable gland in black polyamide 08-13 mm 010-15 mm 2 cable glands in black polyamide 010-15 mm Colour temperature 113 116 Control gear constant current driver 5-point terminal block...

Resistant to agressive chemicaI environments Boyle ATEX zones Zone 2 - 21/22 Environment Extreme High-intensity vibration resistance Durable and maintainable luminaire Principal part numbers Light output (Im) 1850 2775 4625 5550 9250 Light source High performance and removable driver and LED modules Heat management Heatsink in aluminium Optic Optical diffuser Housing: Polycarbonate Coextruded PO/PMMA Control gear constant current driver Cable entries: 1 cable gland in black polyamide 08-13 mm 113 2 cable glands in black polyamide 010-15 mm 216-10 Electrical class...

Hutton ATEX zones Zone 2 - 21/22 Environment Extreme High-intensity vibration resistance Durable and maintainable luminaire Principal part numbers Light output (Im) 1850 2775 4625 5550 9250 Specifications Options Light source High performance and removable driver and LED modules Heat management Heatsink in aluminium 850 Optic Optical diffuser Housing : Polycarbonate PO Colour temperature 4000K Power supply 220-240V 50/60Hz Control gear constant current driver Resistant to overvoltage : 320 V AC, 48 h Resistant to voltage peak < 4 kV Operating temperature -40°C...

ATEX zones Zone 2 - 21/22 Environment Extreme Vibration resistance Durable and maintainable luminaire Principal part numbers Light output (Im) Designation Code Power (W) L (mm) Weight (Kg) Light source High performance and removable driver and LED modules Housing: Polycarbonate Heat management Heatsink in aluminium Cable entries: 1 cable gland in black polyamide 08-13 mm 010-15 mm 2 cable glands in black polyamide 010-15 mm Control gear 113 116 Power supply 216-10 Operating temperature constant current driver Resistant to overvoltage : 320 V AC, 48 h Resistant to...

Accessories Folded 304L stainless steel protective cover Compatibility Code 304L stainless steel protective cover for installation on the fixing straps of 0100 and 0133 ranges of luminaires. The fixing holes are to be drilled on site to suit the space between fixing straps. 1700 mm PU6363 Folded 316L stainless steel protective cover Compatibility Code 316L stainless steel protective cover for installation on the fixing straps of 0100 and 0133 ranges of luminaires. The fixing holes are to be drilled on site to suit the space between fixing straps. 1700 mm CP00567 304L column mounting...