Catálogos >
Royal IHC >
Single heat exchanger

Single heat exchanger
1 / 2Páginas

Excertos do catálogo

Single heat exchanger Ordering information Single heat exchanger pre-set version 3.80.1017-1V Single heat exchanger external speed version 3.80.1017-1E Optional Temperature control module 3.20.891 The single heat exchanger is designed to control the temperature in a diving system or decompression chamber. The heater unit consists of a fan and a heat exchanger coil. The coil can be used both for heating or cooling the chamber atmosphere. The heater motor is completely sealed. Environmental conditions such as oxygen level, humidity or pressure will not affect the motor at all. The motor is very dependable, because of its brushless design. There are multiple versions of the heater available: one has an adjustable pre-set fan speed, the other has an externally controllable fan speed. The pre-set version runs on any 24 VDC, 2A power supply. The externally controlled version requires an optional fan speed control unit. The heater is designed to run continuously during diving operations. It is tested under pressure for several hours. The performance of the heater varies because of a range of environmental factors such as: • Chamber pressure • Temperature • Motor speed

Abrir o catálogo na página 1

Weight in kg (lbs.), complete unit 9,6 (21,2) Power supply Rotating speed Operating pressure Position 24-28 VDC, 2A 1400-4000 rpm Max. 42 bar (420 msw) Horizontal or vertical All rights reserved. Reproduction in any form or by any means is not allowed, without prior permission in writing from IHC Merwede BV The technology innovator. hytech@ihcmerwede.com www.ihcmerwede.com www.ihchytech.com

Abrir o catálogo na página 2

Single heat exchanger 1 / 2Páginas

Excertos do catálogo

Todos os catálogos e folhetos Royal IHC

Single heat exchanger
1 / 2Páginas