Emergency Light Fittings for Fluorescent Lamps Series EXLUX 6008/EXLUX 6408
1 / 7Páginas

Lighting Technology Emergency Light Fittings pole-mounting fittings • With electronic ballast and integral emergency light unit • For two-pin fluorescent lamps • Central locking switch when opening light fitting • Enclosure in polyester resin non-maintained operation with switchable emergency light • Operating test, weekly • Emergency light duration test Series EXLUX 6008 and EXLUX 6408 light fittings car safety illumination.

Emergency Light Fittings for Fluorescent Lamps Series EXLUX 6008 (Zone 1) Technical Data Explosion protection Dust explosion protection Dust explosion protection Other certificates Rated voltage Back-up fuse for battery set Ambient temperature SNCH 03 ATEX 3519 (Zone 2) SNCH 03 ATEX 3518 (Zone 21 ) SNCH 03 ATEX 3519 (Zone 22) IP 66 / IP 67 (IP 64 when using breathing gland 8162) I (with internal PE terminal)

Emergency Light Fittings for Fluorescent Lamps Series EXLUX 6008 (Zone 1) Technical Data Housing material Central lock Light guides Through wiring Polyester, glass fibre reinforced, Colour: white, similar to RAL 9010 Polycarbonate; protective paint available Polyurethane, foamed into cover Central locking using for socket spanner M8/SW13; cover hinged for access broad bowl, internal reflector of light fitting painted white. Colour: signal white, RAL 9003; anti-glare provision on sides. Special: additional broad deep-bowl reflector (easily mounted) semi-polished aluminium. Fitting available...

Emergency Light Fittings for Fluorescent Lamps Series EXLUX 6008 (Zone 1) Technical Data Cable entries Emergency light electronics Battery charging Deep discharge protection Charging voltage limit Emergency light operation Emergency light duration Changeover voltage Test function Operating test light duration test Function indicators Standard fitting Standard: connection side: 1 cable gland M 25 x 1.5 and 1 stopping plug M 25 x 1.5; opposite side: 1 stopping plug M 25 x 1.5 Sonder: M 20 in plastic or metal drilled holes options: 2 x NPT V2" or 1 x NPT 3IA" pole mounting Pole mounting...

Emergency Light Fittings for Fluorescent Lamps Series EXLUX 6008 (Zone 1) Technical Data Operation modes Operating voltage On delivery light fitting is wired for maintained operation; by removing the jumper between terminals 1 and 2 and connecting external switch F, the fitting is converted to maintained operation with switchable emergency lighting. Terminals emergency lighting electronics Terminals emergency lighting electronics Maintained operation with switchable emergency lighting Maintained operation On failure of supply to general lighting, fitting is supplied from the battery,...

Emergency Light Fittings for Fluorescent Lamps Series EXLUX 6008 (Zone 1) Accessories and spare parts

Emergency Light Fittings for Fluorescent Lamps Series EXLUX 6008 (Zone 1) Accessories and spare parts Dimension drawings (all dimensions in mm) - subject to alterations Dimensions Light fitting 1) fixed mounting distance 2) variable mounting distance EXLUX 6008 and EXLUX 6408 Standard light fitting Dimensions Light fitting EXLUX 6008 and EXLUX 6408 Pole mounting light fitting We reserve the right to make alterations to the technical data, weights, dimensions, designs and products available without notice. The illustrations cannot be considered binding.