3 Phase Synchronous Generators - Industrial/Marine Applications
1 / 16Páginas

Three Phase Synchronous Generators INDUSTRIAL / MARINE APPLICATIONS

GENERATING SATISFACTION MarelliGenerators is a division of Marelli Motori SpA, an internationai manufacturer of electrical machines. MarelliGenerators offers a complete selection of low and medium voltage three-phase synchronous generators for continuous prime power and stand-by power applications. Whatever your needs, our qualified engineers will offer the best soilutions to suit your requirements. High efficiency, life-long reliability and in compliance with the international standards give MarelliGenerators the right to be a worldwide leader. APPLICATION FIELDS MarelliGenerators offers...

TECHNICAL INFORMATION The generators are designed in compliance with: IEC 60034-1 ; CEI EN 60034-1 ; BS 4999-5000; VDE 0530, NF 51 -100,111 ; OVE M-10; NEMA MG 1.22; UL1446, and UL1004B is available on request. MarelliGenerators bear the "CE" mark for all generators. Vibration level in accordance to IEC 60034-14. *: medium voltage 400 + 500 Frame size EXCITATION SYSTEM The generators are self-exciting, by means of a brushless type excitation system. The voltage is maintained within ± 0,5% of the nominal value in steady state condition with a balanced and non distorting load. Auxiliary...

Generators from frame sizes 160 to 500 for industrial application are supplied with 2/3 pitch winding to reduce the voltage harmonic content in applications with non-linear loads. The no-load voltage waveform is sinusoidal with a residual harmonic ^ 2%. Total Harmonic Distortion (THD) ^ 2%. TELEPHONE INTERFERENCE The Telephonic Harmonic Factor (THF) is less than 2% as defined by IEC 60034-1. RADIO INTERFERENCE Radio interference conforms to Class B Group 1 as defined by EN55011. THREE PHASE SHORT CIRCUIT CURRENT Generators with auxiliary windings or PMG ensure a three phase short-circuit...

INSULATION, IMPREGNATION AND PROTECTIVE TREATMENT OF WINDING Class H insulation system. The generators are impregnated with high grade resin, using the latest technologies (VPI). A further protective treatment is applied on the whole range, making the generators suitable for tough environmental conditions. Special degrees of protection and tropicalisation are available on request. PROTECTION DEGREE The standard protection degree is IP 23. Generators can be supplied wjth protection degree IP 55 on request. Higher protection degrees are available for frame sizes 250 to 710 through the...

INDUSTRIAL APPLICATION / LOW VOLTAGE - 50/60Hz **: 690 V only. For different voltages please contact MarelliMotori. Ratings refer to following conditions: balanced non-deforming load, altitude below 1.000 m asi, minimum power factor 0,8.

INDUSTRIAL APPLICATION / LOW VOLTAGE - 50/60Hz Ratings refer to the following conditions: balanced non-deforming load, altitude below 1.000 m asi, minimun power factor 0,8.

MARINE APPLICATION / LOW VOLTAGE - 50/60Hz **: 690 V only. For different voltages please contact MarelliMotori. Ratings refer to the following conditions: balanced non-deforming load, altitude below 1.000 m asi, minimun power factor 0,8.

MARINE APPLICATION / LOW VOLTAGE - 50/60Hz Ratings refer to the following conditions: balanced non-deforming load, altitude below 1.000 m asi, minimun power factor 0,8.

INDUSTRIAL APPLICATION / MEDIUM AND HIGH VOLTAGE - 50Hz Ratings refer to the following conditions: balanced non-deforming load, altitude below 1.000 m asi, minimun power factor 0,8. High voltage generators (11.000 V) will have initial MJJ

INDUSTRIAL APPLICATION / MEDIUM AND HIGH VOLTAGE - 50Hz Ratings refer to the following conditions: balanced non-deforming load, altitude below 1.000 m asi, minimun power factor 0,8. High voltage generators (11.000 V) will have initial MJJ

INDUSTRIAL APPLICATION / MEDIUM AND HIGH VOLTAGE - 60Hz Ratings refer to the following conditions: balanced non-deforming load, altitude below 1.000 m asi, minimun power factor 0,8. High voltage generators (13.800 V) will have initial MJJ

INDUSTRIAL APPLICATION / MEDIUM AND HIGH VOLTAGE - 60Hz Ratings refer to the following conditions: balanced non-deforming load, altitude below 1.000 m asi, minimun power factor 0,8. High voltage generators (13.800 V) will have initial MJJ

STANDARD TYPE OF CONSTRUCTION * Single bearing configuration. Special configuration and shaft extensions are available on request. • Available ® Most common

D (max) dimensions shown refers to biggest adaptor/coupling

e-mail: sales@marellimotori.com ITALIAN OFFICES 20092 Cinisello Balsamo (Ml) Italy e-mail: milan@marellimotori.com e-mail: florence@marellimotori.com MARELLIMOTORI OVERSEAS OFFICES: GREAT BRITAIN Meadow Lane e-mail: uk@marellimotori.com CENTRAL EUROPE Marelli Central Europe GmbH e-mail: germany@marellimotori.com e-mail: usa@marellimotori.com ASIA PACIFIC Marelli Asia Pacific Sdn Bhd Hicom - Glenmarie Industrial Park e-mail: asiapacific@marellimotori.com SOUTH AFRICA Marelli Electrical Machines South Africa (Pty) Ltd 55 Activia Rd-Activia Park Republic of South Africa e-mail:...