Ex Series navigation lights brochure
1 / 16Páginas

Ex/ATEX LIGHTS NAVIGATION LIGHTS

LOPOLIGHT Ex NAV. LIGHTS - WHY Explosion proof Navigation LIGHTS? - ATEX/IEC Ex ZONE 1 AND 2 WHAT IS Ex-EQUIPMENT/AREAS? - Ex-equipment are traditionally used in places like. - The maritime industry is increasingly requesting Ex lights for ZONES AND CATEGORIES - ZONE 0,1 and 2 LABELLING/ CLASSIFICATION - Light decals Ex LIGHT CONSTRUCTION - Classification and category WHAT IS INCLUDED WITH A LOPOLIGHT Ex LIGHT - Included in package - NOT Included WHAT IS Ex-EQUIPMENT/AREAS? - Ex-equipment are traditionally used in places like: - The maritime industry is increasingly requesting Ex lights...

WHY EXPLOSION PROOF NAVIGATION LIGHTS? The location of the Navigation lights onboard leaves little room for flExibility. It is important that your vessel is displaying the correct lights at the correct position demanded by the COLREGS – this enhances safety at sea by lowering the risk for misunderstandings. The number of vessels with an ATEX/IEC Ex zone is increasing rapidly. Consider the growing fleet of NLG tankers and the associated infrastructure such as tugs, pilot boats and service vessels, or the hundreds of vessels in build now using LNG, Methanol, Ammonia, and others – all with...

Ex-equipment is traditionally used in places like: The maritime industry is increasingly requesting Ex lights for: • Oil refineries • Off shore installations (platforms) • Filling stations • Tunnels/ sewers/ drains • Milling industry / printing-house / painting industry • Farmer’s installations • Mining industry • Gas/oil terminals operations such as tugs, pilot boats and service vessels • Alternative fueled vessels (using methanol,

Ex LIGHT CLASSFICATIONS(ATEX) Area Classification by group and category according to intended use. Equipment Group II (surface industry) LOPOLIGHT Ex LIGHTS APPROVED TO: COLREG72, MED (Wheelmark), UL1104, DNV, ABS, ATEX/IEC Ex equipment group II, Category 2, Zone 1. Standards: ISO/IEC 80079-34:2020, IEC 60079-18:2015, IEC 60079-7:2015 Presence or Duration of Explosive Atmosphere Continuous presence (Insite the tank) Likely to occur (Cloose proximity to vents and valves) Level of Protection. Faults to Allow for Comparison with Present Practice Very high level of protection: 2 independent...

ZONE 0 - mark for category 1 Zone 0 classifications for gases, vapours and mists are directly relevant to oil and gas platforms, drilling rigs and storage facilities. ZONE 1 - mark for category 2 The difference between the mentioned zones can be described like this: Zone 1 is an area that is classified ‘as a place in which an Explosive atmosphere consisting of a mixture with air or flammable substances in the form of gas, vapours and mists is likely to occur occasionally during normal operation’. ZONE 2 - mark for category 3 Zone 2 is a hazardous area classified as an atmosphere where a...

LABELLING/ CLASSIFICATION Explosion protected Increased safety LOPOLIGHT Humlebaek, Denmark 2804 II 2G DAN 22ATEX0205X + IECEx CNEx 23.0011X Ex mb eb IIB T5 Gb Equipment protection level

TECHNICAL DETAILS. Design, dimensions and quality as the Lopolight Professional series navigation lights: Hard coat anodized aluminium housings, PMMA optics, fully encapsulated, all certified to ATEX/IEC Ex K-lock system Aluminium base Prepared for 2 x M25 x 1,5 Ex cable glands Inner grounding Mounting base Ground strap (not included)

INCLUDED WITH A LOPOLIGHT Ex LIGHT? INCLUDED IN PACKAGE 1 Navigation light 1 pcs. Ex connector 1 bag with 3 mounting screws 1 pcs. HDPE mounting baseplate NOT INCLUDED (SEE ACCESSORIES) Cable glands Ground strap

Ex LIGHTS PRODUCT RANGE RANGE UNDER 50 METERS Regular temperature range OVER 50 METERS Ice-class Regular temperature range Starboard sidelight, double Port sidelight, double Stern light, double Masthead, double Towing stern, double M25 x 1,5 EX/ATEX Cable Glands set of 2 M20 x 1,5 EX/ATEX Cable Glands set of 2 M25 x 1,5 EX/ATEX Cable Gland set of 1 M20 x 1,5 EX/ATEX Cable Glands set of 1 Grounding strap kit, 250mm, 6mm2 mesh wire, Incl. M5 bolt and washer, Ø5mm ring terminal at light end - Ø8mm ring terminal at ships

ORDER Ex LIGHTS FROM WEB-SHOP

We will host webinars specifically tailored to installers and integrators. This webinar will present the product offering and the specific installation aspects of Ex lights. Ex LIGHT KNOW-HOW The Lopolight Team has received training in the products, the requirements – and most importantly: In which zones can the Lopolight Ex navigations lights be used.

Power point Product samples INFORMATION MATERIAL A4 Flyer Webinar /Training Catalogue Direct mail Press Releases We’ve compiled extensive resources to assist you in obtaining the essential information you need. Visit lopolight.com to access and download files pertaining to our Ex navigation lights.

INSTALLATION GUIDE • This product is covered by our 5-year limited warranty. The light in this package is type approved to the following standards: • If you need to claim a warranty for your product, please fill in the form at www.lopolight.com/warranty, under the Warranty tab. • Quick access by the QR code Recognized by the following authorities: • IMO, MED (EU-wheelmark), USCG Ex PRODUCTS MARK: All Lopolight Ex products have the following marking plate: The installation shall be performed by a trained electrician – having received instructions in general Ex installations as specified in...

MOUNTING: CHECK & ENSURE PROCESS 1) Check that the Lopolight product is marked for Ex installation. 2) Prepare the installation site by ensuring the fastening holes/conversion plates, bases etc. are ready for the physical mounting. 3) Check that the power-supply cables are disconnected from any power-source at the feed-end. (Typically, Lopolight NLC system mounted in wheelhouse) CONNECTING POWER: 8) Ensure that the internal ground connection (between the navigation light and the Lopolight base) is firmly bolted. (DIN-912, M4 stainless bolt used. Torque: ~2.7Nm) 9) Remove the outer sheet to...