
Excertos do catálogo

Actuator LA25 Data sheet UNAKEJ LINAK.COM/TECHLINE WE IMPROVE YOUR LIFE
Abrir o catálogo na página 1
With its robust design, high IP degree and aluminium housing, the actuator LA25 is ideal for harsh environments where operation under extreme conditions is required. Furthermore, the compact dimensions of the LA25 make it applicable for confined spaces. Features: • 12 or 24 V DC permanent magnetic motor • Thrust from 600 N - 2500 N in push and pull • Max. speed up to 25 mm/sec. depending on load and spindle pitch • Stroke length from 20 - 300 mm • Protection class: IP66 (dynamic) and IP69K (static) • Built-in endstop switches • Guided nut Options in general: • Back fixture and piston rod...
Abrir o catálogo na página 2
Actuator with:
Abrir o catálogo na página 3
Permanent magnet motor 12 or 24V DC The housing is made of casted aluminium, coated for outdoor use and in harsh conditions Spindle part: Outer tube: Extruded aluminium anodised Inner tube: Stainless steel AISI304/SS2333 Acme spindle: Trapezoidal spindle with high efficiency Temperature range: For IECEx/ATEX: - 25o C to +65o C - 40o C to +85o C o o - 40 F to +185 F - 13o F to +149o F Full performance +5o C to +40o C Storage temperature: Weather protection: Rated IP66 for outdoor use. Furthermore, the actuator can be washed down with a high-pressure cleaner (IP69K). Noise level: 58.5 dB (A)...
Abrir o catálogo na página 4
The built-in dimension depends upon the chosen safety option and stroke length (s).
Abrir o catálogo na página 6
Built-in dimensions
Abrir o catálogo na página 7
Built-in dimensions
Abrir o catálogo na página 8
Built-in dimensions The built-in dimensions for options M and F are measured according to this illustration. Piston Rod Eyes Option “1” and “A” Piston 0231033, Zinc coated steel Piston 0231096, Stainless steel AISI 304 Option “2” and “B” Piston 0231016 with bushings, Zinc coated steel Piston 0231095 with bushings, Stainless steel AISI 304
Abrir o catálogo na página 9
Piston Rod Eyes Option “3” and “C” Piston 0231016, Zinc coated steel Piston 0231095, Stainless steel AISI 304 Option “4” and “D” Piston 0231033 with bushings, Zinc coated steel Piston 0231096 with bushings, Stainless steel AISI 304
Abrir o catálogo na página 10
Option "K" Piston 0351043, Stainless steel AISI 304 Piston 0351035, Stainless steel AISI 304 Piston 0251039, Stainless steel AISI 303 Option "M" Piston 0231094, Stainless steel AISI 304 The Piston Rod Eye is only allowed to turn 0 - 90 degrees.
Abrir o catálogo na página 11
Back fixtures Option “1” and “A” LINAK P/N: 0251011 without bushings, Zinc coated steel 0251015 without bushings, Stainless steel AISI 304 Option “2” and “B” LINAK P/N: 0251010 with bushings, Zinc coated steel 0251014 with bushings, Stainless steel AISI 304 Option “3” and “C” LINAK P/N: 0251010 without bushings, Zinc coated steel 0251014 without bushings, Stainless steel AI
Abrir o catálogo na página 12
Back fixtures Option “4” and “D” LINAK P/N: 0251011 with bushings, Zinc coated steel Option “5” and “F” LINAK P/N: 0251032 without bushings, Zinc coated steel 0251034 without bushings, Stainless steel AISI 304 Option “6” and “G” LINAK P/N: 0251026 with bushings, Zinc coated steel 0251033 with bushings, Stainless steel AI
Abrir o catálogo na página 13
Back fixtures Option “7” and “H” LINAK P/N 0251026 without bushings, Zinc coated steel 0251033 without bushings, Stainless steel AISI 304 Option “8” and “I” LINAK P/N 0251032 with bushings, Zinc coated steel 0251034 with bushings, Stainless steel AISI 304 Option “M” LINAK P/N: 0251021, Stainless steel AISI 3
Abrir o catálogo na página 14
Back fixture orientation
Abrir o catálogo na página 15
Cable dimensions Brown: Blue: Violet: Black: Red: Yellow: Green: White: *AWG: American Wire Gauge Brown: Blue: Violet: Black: Red: Yellow: Green: White: The LA25 standard cable is a UV resistant PVC cable.
Abrir o catálogo na página 16
Speed and current curves - 12V motor The values below are typical values and made with a stable power supply and an ambient temperature of 20˚C.
Abrir o catálogo na página 17
Speed and current curves - 24V motor The values below are typical values and made with a stable power supply and an ambient temperature of 20˚C.
Abrir o catálogo na página 18
I/O specifications: Actuator with endstop signal output Standard connector front view
Abrir o catálogo na página 20
I/O specifications: Actuator with endstop signals and relative positioning - Single Hall Standard connector front view DEUTSCH 8P -<—BROWN <—BLUE
Abrir o catálogo na página 21
I/O specifications: Actuator with endstop signals and relative positioning - Single Hall Single Hall output (PNP) Movement per single Hall pulse: LA25030 Actuator = 0.25mm per pulse LA25060 Actuator = 0.5mm per pulse LA25090 Actuator = 0.75mm per pulse LA25120 Actuator = 1.0mm per pulse LA25200 Actuator = 1.7mm per pulse Frequency: Frequency is 10 - 20 Hz on Single Hall output depending on load. Pulse ON time is minimum 8ms. OFF time between two ON pulses is minimum 8ms. Overvoltage on the motor can result in shorter pulses. Diagram of Single Hall: Output voltage min. VIN - 2V Max. current...
Abrir o catálogo na página 22
I/O specifications: Actuator with endstop signals and absolute positioning - Analogue feedback Standard connector front view -◄—BROWN —BLUE
Abrir o catálogo na página 23
I/O specifications: Actuator with endstop signals and absolute positioning - Analogue feedback
Abrir o catálogo na página 24
I/O specifications: Actuator with endstop signals and absolute positioning - PWM Standard connector front view DEUTSCH 8P
Abrir o catálogo na página 25
I/O specifications: Actuator with IC Basic Standard connector front view
Abrir o catálogo na página 26
I/O specifications: Actuator with IC Basic
Abrir o catálogo na página 27
I/O specifications: Actuator with IC Advanced - with BusLink Standard connector front view DEUTSCH 8P
Abrir o catálogo na página 28
I/O Specifications: Actuator with IC Advanced - with BusLink The BusLink software tool is available for IC Advanced and can be used for: Diagnostics, manual run and configuration. Please note that the BusLink cables must be purchased separately from the actuator! Item number for BusLink cable kit: 0147999 (adaptor + USB2Lin)
Abrir o catálogo na página 29
I/O specifications: Actuator with Parallel Standard connector front view DEUTSCH 8P Actuator 8 Actuator 7 Actuator 6 Actuator 5 Actuator 4 Actuator 3 Actuator 2 Actuator 1 BROWN Communication BLUE Communication
Abrir o catálogo na página 30Todos os catálogos e folhetos Linak
-
Control Box CO71
13 Páginas
-
Foot Switch FS3
8 Páginas
-
Actuator LA40
16 Páginas
-
DESKLINE®
12 Páginas
-
Quality Matters
8 Páginas
-
Built-in DB5
4 Páginas
-
Built-in DB6
8 Páginas
-
Built-in actuator DB14
4 Páginas
-
External charger CHJ2
4 Páginas
-
Actuator systems for patient lifts
12 Páginas
-
medline-careline-safety-brochures
24 Páginas
-
Better Solutions - Better Care
28 Páginas
-
Bluetooth® Adapter
4 Páginas
-
Battery pack BAJ
6 Páginas
-
Li-Ion battery disclaimer
2 Páginas
-
Focus on Marine
24 Páginas
-
TECHLINE Overview
20 Páginas
-
LA36
40 Páginas
-
LA31
8 Páginas
-
LA23
8 Páginas
-
LA12
17 Páginas
Catálogos arquivados
-
ACTUATOR LA28 COMPACT
8 Páginas
-
ACTUATOR LA28
8 Páginas
-
ACTUATOR LA22
4 Páginas
-
ACTUATOR LA14
24 Páginas
-
Lifting Column DL4
4 Páginas
-
Dual Actuator TD1 280 SMPS
4 Páginas
-
Lifting Column BL1
4 Páginas
-
linear actuator la35 MODBUS
2 Páginas
-
linear actuator LA35
8 Páginas
-
Linear Actuator LA29
4 Páginas
-
Linear Actuator LA23
4 Páginas
-
Linear Actuator LA12
8 Páginas