Catálogos >
Linak >
Built-in actuator DB14

Built-in actuator DB14
1 / 4Páginas

Excertos do catálogo

Built-in actuator DB14 Data sheet

The DB14 DESKLINE Built-in actuator sets the standards for inline actuators. The DB14 is specially designed for integration in a customised 3-part column, to achieve the optimum freedom of design for various desk applications. The compact design was developed to fulfil the market requirements for a low built-in dimension and at the same time a long stroke length. Furthermore, the compact design enables a very slim guidance design. The DB14 system is controlled by the DESKLINE® control box CBD6S which ensures optimal parallel drive and a pleasantly low noise level. The DB14 can be used as a...

Abrir o catálogo na página 2

Technical specifications: The following specification and curves applies for a DB14 mounted in a profile, like a DL, with max. 250N friction. Duty cycle (%) Nominal length 508 3mm Minimum length retracted at max. load 503 40 35 30 25 20 15 10 * For drawings of the earlier versions, contact the DESKLINE® Technical Support. 5 0 0 200 400 600 800 Performance curve: [N] 2 x DB14 (equally loaded) with CBD6S The 40 above curve applies to a centrally placed load. With moment load there will be an increased friction in the columns, which will reduce the lifting force correspondingly. 35 30 25 aware...

Abrir o catálogo na página 3

Installation dim. Stroke length: Motor type: Standard: Standard: Standard: Cable: Spindle type: Actuator type: 508 = 508 mm 660 = 660 mm F = Standard with IID 0 = Standard 0 = Standard 0 = Standard 0 = 200 mm 0 = 2 x 10 mm pitch DB14 Please order in quantities divisible by the bulk size. Minimum order quantity equals bulk size. Copyright © LINAK 2019.06 . MA M9-02-291-E . Chapter 6.10.1 Terms of use The user is responsible for determining the suitability of LINAK products for specific application. LINAK takes great care in providing accurate and up-to-date information on its products....

Abrir o catálogo na página 4