Coremat XI
1 / 1Páginas

Dimensional data cost effective solution for open mould processes used as core material and/or print blocker n a polyester nonwoven and compatible with all regular Is types of resins, including Polyester, Vinylester, Phenolic and Epoxy n Is suitable for hand lay-up and spray-up processes n Is Roll lenght Roll width Resin uptake Dry weight Applications Lantor Coremat Xi ® hulls, decks and structures of boats and yachts parts and panels of cars, trailers and trucks n ass transit: interior and exterior of trains, light rail M and buses n Leisure: kayaks, surfboards, pools and tubs n Industrial: cladding panels, containers and tanks n ransportation: T Typical mechanical properties of Lantor Coremat Xi* impregnated with unsaturated polyesther resin ® test method Tensile strenght across layers Compression strenght: 10% strain Keep Coremat ® Xi away from direct sunlight, therefore store Coremat ® Xi in the original bag. This will ensure proper functioning of the resin indicator. Please note that the resin indicator is not a guarantee that sufficient resin has been applied, but strictly a control mechanism to identify dry spots. Always check resin content. Flexural strenght Flexural modules Mechanical properties Shear strenght Shear modules *Lantor Coremat Information The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV can not be held liable of any damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to the information provide at any time without further notice. PO box 45 - 3900 AA Verlaat 22 - 3901 RG Veenendaal The Netherlands T +31(0) 318 537 111 composites@lantor.com enabling performance www.lantor.com