Catálogos >
Jason Engineering >
OGF 300X450

OGF 300X450
1 / 2Páginas

Excertos do catálogo

■ Axial or radial split ■ Impeller in-between bearings ■ Very compact weight and size ■ 90 and 180 degree executions ■ CCW or CW rotation DESIGN DATA OGF 300x450 model is designed for fire fighting and firewater duties. The pump can be direct diesel engine driven, electrical motor driven or PTO gear driven. Single stage, double suction centrifugal pump. Horizontal mounting with side-side, bottom-top, side-top and bottom-side suction/discharge execution. Shaft seal: Bearings: Materials: Coating: Weight : Soft gland packing or mechanical seal Grease lubricated ball bearings Casing in Ni-Al-Bronze or Nodular Cast Iron, Impeller in Ni-Al-Bronze Shaft in stainless steel. Carboline epoxy. Makers standard 1250 kgs PERFORMANCE DATA Capacity : Total head: Speed: Power consumption: Driver rating: Fluid: Density: Viscosity: Temperature: NPSH required: NPSH available APPROVALS AND TESTING OGF 300X450 is designed to fit the FiFi I (1 pump) or FiFi II (3 pumps) class requirements for offshore vessels. Class approval as required. Performance test in accordance with ISO 2548 engineering grade 2 Hydrostatic pressure tested to max 27 bar (1,5 times pump delivery pressure against closed discharge valve). Jason@jason.no www.jason.no JASON ENGINEERING AS PH: PO BOX 2151 Stramse FAX:

Abrir o catálogo na página 1