Catálogos >
Jason Engineering >
OGF 250X350

OGF 250X350
1 / 2Páginas

Excertos do catálogo

Ultra-compact build length, ultra light Suction bend in any configuration Symmetric design allows CW and CCW rotation High pressure water-cooled suction bearing Access to dismount impeller on suction side OGF 250x350 model is designed for fire fighting and firewater duties. The pump is direct diesel engine driven, electrical motor driven or PTO gear driven. Single stage, single suction centrifugal pump. Horizontal mounting with end suction or side bottom suction bends Shaft seal: Bearings: Materials: Coating: Weight : Soft gland packing or mechanical seal Grease lubricated ball bearings Casing in Ni-Al-Bronze or Nodular Cast Iron, Impeller in Ni-Al-Bronze, Shaft in stainless steel. Carboline epoxy. Makers standard 450 kgs Capacity : Total head: Speed: Power consumption: Driver rating: Fluid: Density: Viscosity: Temperature: NPSH required: NPSH available: APPROVALS AND TESTING OGF 250X350 is designed to fit the FiFi I class requirements for offshore vessels. Class approval as required. Performance test in accordance with ISO 2548 engineering grade 2 Hydrostatic pressure tested to max 27 bar (1,5 times pump delivery pressure against closed discharge valve). Jason@jason.no www.jason.no JASON ENGINEERING AS PH: PO BOX 2151 Stramse FAX:

Abrir o catálogo na página 1