VC Offshore EU
1 / 2Páginas

Excertos do catálogo

VC Offshore EU Antifouling For Racing: Ultra Smooth, Hard, High Speed Performance Antifouling PRODUCT DESCRIPTION VC Offshore EU is an antifouling product effective against fouling organisms; slime, aquatic plants and animals. A Hard Antifouling suitable for professional and consumer application onto vessels in fresh and salt water. Easy application with no sanding between coats. Quick drying for rapid overcoating and flexible launch times. The smooth film provides a hard scrubbable finish for increased speed and efficiency. Ideal for racing sailors and powerboats. PRODUCT INFORMATION Colour Specific Gravity Volume Solids Converter/Curing Agent Typical Shelf Life 368.9 g/Kg average EU Solvent Emissions Directive (Council Directive 1999/13/EC) Unit Size 750mL, 2L Not all pack sizes are available in all countries DRYING/OVERCOATING INFORMATION Drying 5°C (41°F) Note: Max. Immersion Times are as follows: 535°C 6 mths VC OFFSHORE Wash down with fresh water. OTHER ANTIFOULINGS Check for sound condition. BARE GRP Use VC General Thinner to clean and fully degrease the surface. Lightly sand with 240 grade paper. Rinse with fresh water and allow to dry. Use VC Tar2 to prime and protect against osmosis. STEEL Prime with VC Tar2 to prevent corrosion. LEAD Prime with VC Tar2. WOOD Prime with Primocon. Mixing Stir well before use. Pour the powder (stored under the plastic hat) into the can. Stir or shake thoroughly. Once mixed, the product can be used for up to 7 days, provided it is stored with the lid on and mixed thoroughly before application. Cleaner YTA600 VC General Thinner Airless Spray Pressure: 176210 bar. Tip size: 517 to 521. Conventional Spray Pressure: 23 bar. Tip size: 1.51.8 mm. Other For Airmix spray application: Pressure: 2 bar. Tip Size: 20113. Some Important Points True colour will develop after immersion. Take care to apply all the paint calculated even if it means applying an extra coat. It is important for performance to apply the correct thickness. To prevent premature failure, ensure the correct amount of paint is applied using the coverage as a guide. Product temperature should be minimum 5°C/41°F and maximum 35°C/95°F. Ambient temperature should be minimum 5°C/41°F and maximum 35°C/95°F. Substrate temperature should be minimum 1°C above dew point and maximum 35°C. GRP, Wood, Steel/Iron, Lead. Not suitable for use over Aluminium/Alloy substrates or zinc sprayed surfaces. Suitable for use on GRP, wood, steel/iron and lead. Can be applied direct over most types of antifoulings, provided they are in sound condition, with the exception of PTFE antifoulings. Consult your local International Paint representative for specific overcoating advice if you are unsure about compatibility of VC Offshore EU over your existing coating scheme. Please refer to your local representative or visit www.yachtpaint.com for further information.

Abrir o catálogo na página 1

Take care to apply all the paint calculated even if it means applying an extra coat. It is important for performance to apply the correct thickness. To prevent premature failure, ensure the correct amount of paint is applied using the coverage as a guide. Product temperature should be minimum 5°C/41°F and maximum 35°C/95°F. Ambient temperature should be minimum 5°C/41°F and maximum 35°C/95°F. Substrate temperature should be minimum 1°C above dew point and maximum 35°C. GRP, Wood, Steel/Iron, Lead. Not suitable for use over Aluminium/Alloy substrates or zinc sprayed surfaces. For Racing:...

Abrir o catálogo na página 2