Catálogos >
International Yacht Paint >
Trilux Prop-O-Drev

Trilux Prop-O-Drev
1 / 2Páginas

Excertos do catálogo

Trilux Prop-O-Drev . Antifouling For Propellers, Outboards and Sterngear PRODUCT DESCRIPTION Trilux Prop-O-Drev . is a hard antifouling that is specially formulated for use on outdrives, outboard legs, propellers and sterngear. * Aerosol spray is ideal for painting awkward shapes and difficult to reach areas. * Quick and easy application saves you time and effort. * Suitable for use on aluminium and stainless steel. PRODUCT INFORMATION Colour Specific Gravity Volume Solids Typical Shelf Life Unit Size DRYING/OVERCOATING INFORMATION Drying 0°C (32°F) Trilux Prop-O-Drev . Prime bare metal and factory enamelled surfaces with 2 coats of VC Prop-O-Drev Primer. This is essential on aluminium and alloy as Trilux Prop-O-Drev . is NOT suitable for direct application. For best results on previously antifouled surfaces, remove existing paintwork. Alternatively, abrade with wet 240 grade paper. Spray sparingly 10-15 cm (4-10") from the surface. Apply a minimum of 3 coats, allowing 30 mins between coats. Mixing Shake can vigorously. Once mixing ball is heard, shake for minimum 2 minutes prior to use. After spraying, invert can and spray for 2 seconds to clean the nozzle. Thinner VC General Thinner. Cleaner VC General Thinner. Other Take care to apply all the paint calculated even if it means applying an extra coat. It is important for performance to apply the correct thickness. Some Important Points To prevent premature failure, ensure the correct amount of paint is applied using the coverage as a guide. Product temperature should be minimum 0°C and maximum 35°C. Ambient temperature should be minimum 0°C/32°F and maximum 35°C/95°F. Substrate temperature should be minimum 1°C above dew point and maximum 35°C. Suitable for use on all substrates including suitably primed Aluminium/Alloy and Zinc-sprayed metals. Also suitable for factory enamelled finishes. Approx. 1 can per medium-sized outdrive. TRANSPORTATION,STORAGE AND SAFETY INFORMATION Storage GENERAL INFORMATION: Exposure to air and extremes of temperature should be avoided. For the full shelf life of Trilux Prop-O-Drev . to be Please refer to your local representative or visit www.yachtpaint.com for further information. the AkzoNobel logo and other products mentioned in this publication are trademarks of, or licensed to Akzo Nobel. ©Akzo Nobel 2009.

Abrir o catálogo na página 1

Trilux Prop-O-Drev . Antifouling For Propellers, Outboards and Sterngear realised ensure that between use the container is firmly closed and the temperature is between 5°C/40°F and 35°C/95°F. Keep out of direct sunlight. TRANSPORTATION: Trilux Prop-O-Drev . should be kept in securely closed containers during transport and storage. Safety GENERAL: Contains biocides. Antifoulings should only be wet sanded. Never dry sand or burn-off old antifoulings. Read the label safety section for Health and Safety Information, also available from our Technical Help Line. DISPOSAL: Do not discard tins or...

Abrir o catálogo na página 2