Interprotect
1 / 2Páginas

Excertos do catálogo

Interprotect Primers High Performance Epoxy Primer for Steel, Aluminium and Wood PRODUCT DESCRIPTION Quick drying, easy to apply epoxy primer for high performance protection. * Excellent anticorrosive protection * Antifouling tiecoat for use over epoxy primers * Good abrasion resistance PRODUCT INFORMATION Colour Specific Gravity Volume Solids Converter/Curing Agent Typical Shelf Life Unit Size DRYING/OVERCOATING INFORMATION Drying 5°C (41°F) Perfection Undercoat Note: For all other International antifoulings such as Cruiser Uno EU, Boatguard EU, Ultra EU, Cruiser Polishing Antifouling, Cruiser Premium Plus, Micron Superior, Micron Extra EU, Navigator, Ultra 300, Boatguard 100, Cruiser 200/250, Trilux 200 and Trilux Hard Antifouling, use the Micron 350 overcoating times. Overcoating times relate to Brush/Roller application. If maximum overcoating time is exceeded, sand with 180220 grade wet or dry paper. STEEL Degrease with solvent or Super Cleaner. Gritblast to Sa 2½ near white metal surface. If gritblasting is not possible, grind the metal surface with 2436 grit abrasive discs to a uniform, clean, bright metal surface with a 5075 microns anchor pattern. Use angle grinder on small areas. ALUMINIUM Degrease with solvent or Super Cleaner. Sand well using 24120 grade (aluminium compatible) paper. Coarser grades are recommended to achieve optimum adhesion. Clean thoroughly and allow to dry. Prime using a recommended International primer as soon as possible (within 8 hours) as detailed for specific coating systems. ZINC/GALVANISED STEEL Degrease with solvent or Super Cleaner. Sand well using 60120 grade paper. Clean thoroughly and allow to dry completely. Prime using a recommended International primer as soon as possible (within 8 hours) as detailed for specific coating systems. STAINLESS STEEL Light gritblast to produce a profile of 50 microns. Clean thoroughly and allow to dry completely. Prime using a recommended International primer as soon as possible (within 8 hours) as detailed for specific coating systems. LEAD Degrease with solvent or Super Cleaner. Sand well using 120 grade paper or power wire brush Clean thoroughly and allow to dry. Prime using a recommended International primer as soon as possible (within 8 hours) as detailed for specific coating systems. Please refer to your local representative or visit www.yachtpaint.com for further information. BARE WOOD Sand smooth with 80180 and then 280 grade paper. Remove sanding dust by brushing, dusting and All trademarks mentioned in this publication are owned by, or licensed to, the AkzoNobel group of companies. © AkzoNobel 2019. wiping. If wiping with solvent then allow to dry completely before applying products recommended for application direct to wood (see specific coating systems).

Abrir o catálogo na página 1

Interprotect Primers High Performance Epoxy microns anchor pattern. Use angle grinder on small areas. ALUMINIUM Degrease with solvent or Super Cleaner. Sand well using 24120 grade (aluminium compatible) paper. Coarser grades are recommended to achieve optimum adhesion. Clean thoroughly and allow to dry. Prime using a recommended International primer as soon as possible (within 8 hours) as detailed for specific coating systems. ZINC/GALVANISED STEEL Degrease with solvent or Super Cleaner. Sand well using 60120 grade paper. Clean thoroughly and allow to dry completely. Prime using a...

Abrir o catálogo na página 2