Interfill 830
1 / 2Páginas

Excertos do catálogo

Lightweight Epoxy Profiling Fairing Compound Interfill 830 is the PREMIUM choice of profiling fillers for professional applicators. It has been extensively tested in our laboratories and in the field to the most exacting standards. High expectations and stringent industry requirements have made Interfill 830 one of the most popular fairing compounds in the world. Whether it is used to reshape or repair a keel or beautify a Superyacht construction, Interfill 830 is the product that offers long-term performance of superior quality. Key features and benefits Interfill 830 is available in both standard and fast cure versions, to provide maximum flexibility for application in a variety of conditions When the fast curing agent is used at temperatures around 23oC / 73oF the filler can be sanded and overcoated in 6 hours The fast curing agent offers overcoating a soon as the fillers is sandable at all temperatures Interfill 830 has extremely low density, and is one of the lightest yacht epoxy fillers available in the marketplace Interfill 830 can fill up to 2cm in one application, without the risk of sagging / slumping The high strength, waterproof formulation is very easy to sand using 80-180 grade paper Fully compatible with International’s Interfill 833 finishing filler Simple 1:1 mix ratio Interfill 830 should be applied over cured Epoxy primers or onto cured GRP/Composite. Gelshield® or Gelshield 200 may be used over Interfill 830 within the osmosis schemes. PRODUCT DATA Area Convertor / Curing Agent Methods of Application Available Shades Pack Size Mix Ratio Typical Shelf Life Above and below the waterline YAA868 - Standard, YAA869 - Fast Trowel or Batten YAA867 - Grey 2.5LT, 10LT, 60LT, 205LT 1:1 by volume (as supplied) 2 Years Refer to the relevant datasheet for more information on yachtpaint.com Always read the Health & Safety precautions on the label prior to use

Abrir o catálogo na página 1

Surface preparations and systems Previously painted surface in good condition : Wash down with Boatcare Super Cleaner, rinse with fresh water and allow to dry. Sand with 180–280 grade paper. Poor surface condition : Remove all previous coatings and prime the substrate. Steel / Aluminium : Prime with Intergard 269 or Interprime 820 thinned 15%. Bare Wood : Prime stable constructions only, with Interprime 820. Bare GRP / Composite : Remove surface wax/mould release agent with Degreaser (Oplosser) or Boatcare Super Cleaner. Sand with 80-180 grade paper. If left for longer than 24 hours, two...

Abrir o catálogo na página 2