Fibreglass Surface Prep
1 / 2Páginas

{{requestButtons}}

Excertos do catálogo

Fibreglass Surface Prep - 1

Fibreglass Surface Prep PRODUCT DESCRIPTION Fibreglass Surface Prep is a mould release agent remover, which precludes the need for sanding bare GRP when used with International's No Sand Primer. Fibreglass Surface Prep thoroughly cleans the gelcoat and provides a key for Fibreglass No Sand Primer to be applied. Fibreglass Surface Prep can also be used to prepare aged and weathered alkyds prior to application of subsequent coats by softening the surface slightly. Surface Prep Fibreglass Surface Prep thoroughly cleans and degreases the gelcoat, removing all waxes Fibreglass Surface Prep abrades, cleans and softens old alkyds promoting adhesion of subsequent coats. Easy application with a cloth or sponge creates a good key on the gelcoat surface, while avoiding dust and noise created through abrasion with sand paper. The tinted colour of Fibreglass Surface Prep ensures it is easy to see where the product has been applied to white gelcoat, and makes it difficult to miss areas unintentionally. PRODUCT DATA AVAILABLE SHADES PACK SIZE Typical Shelf Life Refer to Fibreglass Surface Prep product data sheet for more information Always read the Health & Safety precautions on the label prior to use Above and below the waterline Cloth / Sponge

Abrir o catálogo na página 1
Fibreglass Surface Prep - 2

SURFACE PREPARATIONS AND SYSTEMS Apply Fibreglass Surface Prep to a damp cloth or sponge, then wipe the whole surface to be cleaned using moderate pressure. Wipe off with a clean, wet, cloth ensuring no traces of Fibreglass Surface Prep remain. As soon as the surface is dry, it is ready to paint. BARE GRP: If the overcoating time exceeds 4 hours, ensure that the surface is clean and dry prior to ALKYDS: If the overcoating time exceeds 4 hours, re-apply Fibreglass Surface Prep prior to subsequent CAUTION: Protect from frost. Fibreglass Surface Prep will not remove serious blemishes....

Abrir o catálogo na página 2

Todos os catálogos e folhetos International Yacht Paint

  1. Interprotect

    2 Páginas

  2. Liquid Rubbing

    2 Páginas

  3. Cruiser 200

    2 Páginas

  4. Boatguard 100

    2 Páginas

  5. Interstrip AF

    1 Páginas

  6. Gelshield 200

    2 Páginas

  7. Watertite

    2 Páginas

  8. Super Cleaner

    2 Páginas

  9. Original

    2 Páginas

  10. Trilux 33

    2 Páginas

  11. VC 17m Extra

    2 Páginas

  12. Interdeck

    2 Páginas

  13. Danboline

    2 Páginas

  14. Yacht Primer

    2 Páginas

  15. Woodskin

    2 Páginas

  16. VC Offshore EU

    2 Páginas

  17. Perfection Plus

    2 Páginas

  18. Goldspar Satin

    2 Páginas

  19. Compass

    2 Páginas

  20. Schooner

    2 Páginas

  21. Pre-Kote

    2 Páginas

  22. Thinner No. 9

    1 Páginas

  23. Thinner No.7

    1 Páginas

  24. Matting Additive

    2 Páginas

  25. VC Tar2

    2 Páginas

  26. Primocon

    2 Páginas

  27. Perfection

    2 Páginas

  28. Interprime 820

    2 Páginas

  29. Interfill 833

    2 Páginas

  30. Interfill 830

    2 Páginas

  31. Super Gloss HS

    2 Páginas

  32. Cruiser Uno EU

    2 Páginas

  33. Toplac

    2 Páginas

  34. Micron Extra

    2 Páginas

  35. Micron 66

    2 Páginas

  36. Interspeed Ultra

    2 Páginas

  37. Interprime 450

    2 Páginas

  38. Gelshield Plus

    2 Páginas