Catálogos >
International Marine >
Interswift 6900Si

Interswift 6900Si
1 / 4Páginas

Excertos do catálogo

Interswift 6900Si TBT Free Antifouling PRODUCT DESCRIPTION A TBT free, self polishing copolymer antifouling system incorporating patented Silyl Acrylate polymer SPC (Self Polishing Copolymer) technology. INTENDED USES For use at Newbuilding or Maintenance & Repair. PRODUCT INFORMATION BMA694-Brown, BMA697-Red Note: The above codes will be substituted by BMA794-Brown and BMA797-Red when supplied from Felling, Dammam and Bangalore manufacturing locations. Part B (Curing Agent) Volume Solids Typical Film Thickness Range: 75 - 150 microns dry (123 - 246 microns wet) may be specified depending upon end use. Theoretical Coverage Range: 8.1 - 4.1 m²/litre at 75 - 150 microns dft, allow appropriate loss factors Airless Spray, Brush, Roller Flash Point (Typical) Induction Period Drying Information Before Flooding Single Coat Before Flooding Multiple Coats Note For Major Refurbishment and Repair if total dft is >300µm flood times must be increased as follows: 48 hours at 5°C, 36 hours at 25°C and 24 hours at 35°C. Overcoating Data - see limitations REGULATORY DATA 344 g/lt as supplied (EPA Method 24) 171 g/kg of liquid paint as supplied. EU Solvent Emissions Directive (Council Directive 1999/13/EC) Note: VOC values are typical and are provided for guidance purposes only. These may be subject to variation depending on factors such as differences in colour and normal manufacturing tolerances. This product does not contain organotin compounds acting as biocides and as such is in compliance with the International Convention on the Control of Harmful Anti-fouling Systems on ships as adopted by IMO in October 2001 (IMO document AFS/CONF/26). Marine Coatings Page 1 of 4 Issue Date:04/04/2013 Ref:4632

Abrir o catálogo na página 1

Interswift 6900Si TBT Free Antifouling CERTIFICATION When used as part of an approved scheme, this product has the following certification: Product recognised by the following classification societies as compliant with the International Convention on the Control of Harmful Anti-fouling Systems on Ships, 2001 (AFS 2001): • • • • Bureau Veritas Det Norske Veritas Korean Register of Shipping Lloyds Register Consult your International Paint representative for details. SYSTEMS AND COMPATIBILITY Consult your International Paint representative for the system best suited for the surfaces to be...

Abrir o catálogo na página 2

Interswift 6900Si TBT Free Antifouling APPLICATION Mixing This material is a one pack coating and should always be mixed thoroughly with a power agitator before application. Not Recommended. Use International GTA007 only in exceptional circumstances (max 5% by volume). DO NOT thin more than allowed by local environmental legislation. Airless Spray Recommended Tip Range 0.54-0.8 mm (21-31 thou) Total output fluid pressure at spray tip not less than 190 kg/cm² (2700 p.s.i.) Conventional Spray Application by conventional spray is not recommended. Application by brush is recommended for small...

Abrir o catálogo na página 3

Interswift 6900Si TBT Free Antifouling LIMITATIONS UNIT SIZE Coating lifetime is directly proportional to thickness applied. Performance of the product is dependent upon the specified film thickness being achieved. On immersion, Interswift 6900Si will exhibit a slight colour change. Overcoating information is given for guidance only and is subject to regional variation depending upon local climate and environmental conditions. Consult your local International Paint representative for specific recommendations. Apply in good weather. Temperature of the surface to be coated must be at least...

Abrir o catálogo na página 4