Catálogos >
International Marine >
Intergard 5000

Intergard 5000
1 / 4Páginas

Excertos do catálogo

Intergard 5000 IMO Resolution MSC.215 (82) compliant Ballast Tank Coating PRODUCT DESCRIPTION A light coloured, tar free, surface tolerant, two pack epoxy coating with high volume solids (82%). INTENDED USES A high performance epoxy coating for use in water ballast tanks, cofferdams, void spaces, wet spaces, bilges and crude oil tanks. Is type approved as complying with the requirements of IMO Resolution MSC.215 (82) for use on newbuildings. PRODUCT INFORMATION Colour System Film Thickness KBA501-Aluminium, First Coat KBA502-Buff, Second Coat 2 coats at 160 microns dry (195 microns wet) per coat Part B (Curing Agent) Volume Solids 4 volume(s) Part A to 1 volume(s) Part B Specific Gravity Base (Part A) 1.719-1.811 Curing Agent (Part B) 0.965-1.015 Mixed Paint 1.57-1.65 Theoretical Coverage 5.12 m²/litre at 160 microns dft, allow appropriate loss factors Airless Spray, Brush, Roller Flash Point (Typical) Part A 32°C; Part B 58°C; Mixed 33°C Drying Information Walk-on Time Minimum time before ballasting Overcoating Data - see limitations Intergard 5000 Full coat over full coat Intergard 5000 Full coat over stripe coat REGULATORY DATA 220 g/lt as supplied (EPA Method 24) 152 g/kg of liquid paint as supplied. EU Solvent Emissions Directive (Council Directive 1999/13/EC) Note: VOC values are typical and are provided for guidance purposes only. These may be subject to variation depending on factors such as differences in colour and normal manufacturing tolerances. Marine Coatings Page 1 of 4 Issue Date:04/07/2016 Ref:4234

Abrir o catálogo na página 1

Intergard 5000 IMO Resolution MSC.215 (82) compliant Ballast Tank Coating CERTIFICATION IMO PSPC Resolution MSC.215 (82) - Registro Italiano Navale (RINA) IMO PSPC Resolution MSC.215 (82) - American Bureau of Shipping (ABS) IMO PSPC Resolution MSC.215 (82) - Bureau Veritas (BV) IMO PSPC Resolution MSC.215 (82) - Det Norske Veritas (DNV) IMO PSPC Resolution MSC.215 (82) - Lloyds Register (LR) Shop Primers Intergard 5000 is certified for use over the following International Paint Shop Primers: • • • • • Interplate Zero Interplate 805 Interplate 855 Interplate 937 Interplate 997 International...

Abrir o catálogo na página 2

Intergard 5000 IMO Resolution MSC.215 (82) compliant Ballast Tank Coating APPLICATION Mixing Material is supplied in two containers as a unit. Always mix a complete unit in the proportions supplied. Once the unit has been mixed it must be used within the working pot life specified. (1) Agitate Base (Part A) with power agitator. (2) Combine entire contents of Curing Agent (Part B) with Base (Part A) and mix thoroughly with power agitator. Ventilation and Humidity Control After application of the final coat of the system, ventilation should be continued for a minimum period of 48 hours unless...

Abrir o catálogo na página 3

Intergard 5000 IMO Resolution MSC.215 (82) compliant Ballast Tank Coating LIMITATIONS Intergard 5000 should be high pressure fresh water washed and/or solvent washed prior to overcoating, where necessary, to ensure removal of any surface contamination that has accumulated. The curing agent for Intergard 5000 has a tendency to go cloudy when stored at temperatures below 5°C. Warming the curing agent above 5°C will restore the clear nature of the product. No adverse effect on performance is observed if the curing agent is cloudy when used. Film Thickness Minimum Film Thickness : The specified...

Abrir o catálogo na página 4