Hydroblasting Standards
1 / 15Páginas

{{requestButtons}}

Excertos do catálogo

Hydroblasting Standards - 1

Hydroblasting Standards www.international-marine.com

Abrir o catálogo na página 1
Hydroblasting Standards - 2

Hydroblasting Standards Contents 1. 2. 3. 4. Introduction Format Explanatory Text Procedure For Using The Standards 5. Notes 6. References 7. Visual Standards 1 Introduction Hydroblasting is a technique for cleaning surfaces, which relies entirely on the energy of water striking a surface to achieve its cleaning effect. Abrasives are NOT used in hydroblasting systems. Consequently the problems caused by dust pollution and by the disposal of spent abrasives are eliminated. Two different hydroblasting operating pressures are commonly encountered. • High pressure hydroblasting, operating at...

Abrir o catálogo na página 2
Hydroblasting Standards - 3

The definitions are: Rust Grade C: Steel surface completely covered with rust but with little or slight pitting under normal vision. Rust Grade D: Steel surface completely covered with rust on which general pitting is visible under normal vision. 3.2 Blast Standards The standard illustrates grade C and D surfaces prepared by hydroblasting to two different degrees of cleanliness. These are designated HB2 and HB21/2 and are comparable to Sa2 and Sa21/2 described in the ISO 8501-1:1988 surface preparation standard and to SSPC-SP6 and SSPC-SP10 of the Steel Structures Painting Council surface...

Abrir o catálogo na página 3
Hydroblasting Standards - 4

4.3 Compare the prepared surface with the photograph selected immediately after hydroblasting but before the surface has flash rusted to evaluate the degree of cleaning, see note 5.3. 4.4 Prior to painting compare the flash rusted surface with the flash rusting photographs. For example, D HB2 L, D HB2 M, D HB2 H to evaluate the degree of flash rusting that has occurred. 4.5 Check that the paint product specified is suitable for overcoating the degree of flash rusting that has occurred. See note 5.7. 5 Notes 5.1 Definition of Terms The terms hydroblasting, hydrojetting and water jetting...

Abrir o catálogo na página 4
Hydroblasting Standards - 5

5.6 Chemical Corrosion Inhibition Flash rusting can be prevented by the use of water soluble chemical corrosion inhibitors. These inhibitors may leave a crystalline layer on the steel surface as the water evaporates which can then lead to a loss of adhesion and osmotic blistering if coatings are applied over this type of surface. International Paint do not recommend the use of corrosion inhibitors to hold wet blasted surfaces. If inhibitors are used, they must be thoroughly washed off with fresh water before International Paint products are applied. 5.7 Removal of Flash Rusting When flash...

Abrir o catálogo na página 5
Hydroblasting Standards - 6

7 Visual Standards Rust Grade Standards Rust grade C Rust grade D

Abrir o catálogo na página 6
Hydroblasting Standards - 7

Preparation Standard C HB2 Rust grade C C HB2 Rust grade C Hydroblasted to an Sa2 equivalent

Abrir o catálogo na página 7
Hydroblasting Standards - 8

Degree of Flash Rusting C HB2 L. Light flash rusting C HB2 M. Moderate flash rusting C HB2 H. Heavy flash rusting

Abrir o catálogo na página 8
Hydroblasting Standards - 9

Preparation Standard C HB2 1/2 Rust grade C C HB21/2 Rust grade C Hydroblasted to an Sa21/2 equivalent

Abrir o catálogo na página 9
Hydroblasting Standards - 10

Degree of Flash Rusting C HB21/2 L. Light flash rusting C HB21/2 M. Moderate flash rusting C HB21/2 H. Heavy flash rusting

Abrir o catálogo na página 10
Hydroblasting Standards - 11

Preparation Standard D HB2 Rust grade D D HB2 Rust grade D Hydroblasted to an Sa2 equivalent

Abrir o catálogo na página 11
Hydroblasting Standards - 12

Degree of Flash Rusting D HB2 L. Light flash rusting D HB2 M. Moderate flash rusting D HB2 H. Heavy flash rusting

Abrir o catálogo na página 12
Hydroblasting Standards - 13

Preparation Standard D HB2 1/2 Rust grade D D HB21/2 Rust grade D Hydroblasted to an Sa21/2 equivalent

Abrir o catálogo na página 13
Hydroblasting Standards - 14

Degree of Flash Rusting D HB21/2 L. Light flash rusting D HB21/2 M. Moderate flash rusting D HB21/2 H. Heavy flash rusting

Abrir o catálogo na página 14
Hydroblasting Standards - 15

September 2004 Argentina Australia Bahrain Belgium Brazil Bulgaria Canada Chile Colombia Croatia Cuba Cyprus Denmark Ecuador Egypt Estonia Fiji Finland France Germany Greece Hong Kong Iceland India Indonesia Iran Italy Japan Kuwait Latvia Lithuania Luxembourg Malaysia Malta Mexico Netherlands New Zealand Northern Ireland Norway Pakistan Panama Papua New Guinea Peoples Republic of China Peru Philippines Poland Portugal Qatar Republic of Ireland Romania Russia Saudi Arabia Singapore Slovenia South Africa South Korea Spain Sri Lanka Sweden Taiwan Thailand Turkey U.S.A. Ukraine United Arab...

Abrir o catálogo na página 15

Todos os catálogos e folhetos International Marine

  1. Intergard 5000

    4 Páginas

  2. Interline 975P

    4 Páginas

  3. Interline 994LT

    4 Páginas

  4. Interline 644

    4 Páginas

  5. Interspeed 5617

    4 Páginas

  6. Interplate Zero

    4 Páginas

  7. Intergard 269

    4 Páginas

  8. Interline 850

    4 Páginas

  9. Intersleek 1100SR

    4 Páginas

  10. Intersleek 717

    4 Páginas

  11. Interfine 878

    4 Páginas

  12. Intershield 456

    4 Páginas

  13. Intershield 851

    4 Páginas

  14. Intershield 852

    4 Páginas

  15. Intercept 7000

    1 Páginas

  16. Interbond 808

    2 Páginas

  17. Integard 5555 PIC

    2 Páginas

  18. Intertrac Vision

    4 Páginas

  19. Intersleek 1000

    6 Páginas

  20. Intershield 300

    8 Páginas

  21. Interline 9001

    6 Páginas

  22. Fisheries

    2 Páginas

  23. Interline 904

    2 Páginas

  24. Intershield 6GV

    2 Páginas

  25. Intersleek 700

    2 Páginas

  26. Interswift 6600

    2 Páginas

  27. Interswift 6800HS

    2 Páginas

  28. Interspeed-5640

    2 Páginas

  29. Intershield 300V

    4 Páginas

  30. Intergard 821

    4 Páginas

  31. Intertherm 50

    4 Páginas

  32. Intergard 403

    4 Páginas

  33. Intersleek

    6 Páginas

  34. Interswift 6900Si

    4 Páginas

  35. Intergard 7500

    2 Páginas

  36. Intergard 7020

    2 Páginas

  37. Interline®9001

    5 Páginas

  38. Interplate® Zero

    11 Páginas

  39. Cargo Hold

    8 Páginas

  40. Colour Card

    2 Páginas

  41. Interprime 65

    4 Páginas

  42. Interline 104

    4 Páginas

  43. Intersleek 386

    4 Páginas

  44. Intersleek 737

    4 Páginas

  45. Intersleek 970

    4 Páginas

  46. Interspeed 6400

    4 Páginas

  47. Interswift 655

    4 Páginas

  48. Intertuf 362

    4 Páginas

  49. Interswift 455FB

    4 Páginas

  50. INTERLAC 678

    4 Páginas

  51. INTERGARD 400

    4 Páginas

  52. INTERFINE 629HS

    4 Páginas

  53. INTERTHANE 990

    4 Páginas

  54. INTERBOND 501

    4 Páginas

  55. INTERPRIME 198

    4 Páginas

Catálogos arquivados

  1. Intergard 343

    9 Páginas