Catálogos >
Icom >
IC-M603

IC-M603
1 / 4Páginas

Excertos do catálogo

Superior receiver performance The IC-M603 has excellent receive specifications* which allow a weak signal a better chance of being heard when louder signals are around it. The powerful audio output from the front facing large speaker further increases the audibility and quality of re- ceived calls. * More than 75dB for intermodulation rejection, spurious response and adjacent channel selectivity and -5dBu emf (typical) high sensitivity. Large LCD with dot-matrix characters The large full dot-matrix display is designed for optimum read- ability in any lighting condition. With the extra large...

Abrir o catálogo na página 2

IJ»JL marni Front and rear panel microphone connection detached from the front panel and panel without any modification. phone extension cable, OPC- Transparent installation Image The RX speaker function, "receiver-repeater" allows you to monitor the received radio audio from a hailer horn on the deck or tower. You can also make an announcement on- board from the microphone. Favorite channel function This function allows quicker channel selection. Set the "TAG" channel to the channels used most often. When pushing the up/down buttons on the speaker microphone, only tagged chan- nels are...

Abrir o catálogo na página 3

• Usable channels : INT and USA* channels • Power supply requirement: • Operating temperature range : (WxHxD; projections are not included) • NMEA formats • Output power • Frequency error • Spurious emissions • Residual modulation • Squelch sensitivity • Adjacent channel • Spurious response • Audio output power 0% distortion with a 4Q load) Measurements made in accordance with EN 301 025. All stated specifications are subject to change without notice or obligation. Supplied accessories: • Hand microphone • DC power cable Some options may not be available in some countries. Please ask your...

Abrir o catálogo na página 4