Catálogos >
Hempel >
HEMPEL'S ANTIFOULING DYNAMIC 79540

HEMPEL'S ANTIFOULING DYNAMIC 79540
1 / 2Páginas

Excertos do catálogo

Product Data HEMPEL'S ANTIFOULING DYNAMIC 79540 Description: HEMPEL'S ANTIFOULING DYNAMIC 79540 is a high solid, self-smoothening and self-polishing antifouling based on a hydrolysing silyl acrylate binder that ensures effective polishing control. An inorganic fibre reinforcement provides high mechanical strength. This product does not contain organotin compounds acting as biocides and complies with the International Convention on the Control of Harmful Antifouling Systems on Ships as adopted by IMO October 2001 (IMO documents AFS/CONF/26). Recommended use: As an antifouling for bottom and boottop especially on vessels operating at medium to high speed and high activity with short idle periods and for service intervals up to 90 months. Availability: Part of Group Assortment. Local availability subject to confirmation. PHYSICAL CONSTANTS: Shade nos/Colours: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch: VOC content: Shelf Life: 60600*/ Brown. Flat 5.8 ± 1 58 [2362.9 sq.ft./US gallon] - 100 micron 24 °C [75.2 °F] 1.9 kg/litre [15.5 lbs/US gallon] 2 hour(s) 20°C/68°F 411 g/l [3.4 lbs/US gallon] 12 months (25°C/77°F) from time of production. Depending on storage conditions, mechanical stirring may be necessary before usage. - *other shades according to assortment list. The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. APPLICATION DETAILS: Application method: Thinner (max.vol.): Nozzle orifice: Nozzle pressure: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety: Airless spray / Brush/Roller see REMARKS overleaf 08080 (5%) / 08080 (5%) 0.027 - 0.031 " 270 [3915 psi] (Airless spray data are indicative and subject to adjustment) HEMPEL'S THINNER 08080 100 micron [4 mill] see REMARKS overleaf 175 micron [7 mill] According to specification. According to specification. Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations. Date of issue: December 2011 - Page: 1/2 Product Data Sheet

Abrir o catálogo na página 1

HEMPEL'S ANTIFOULING DYNAMIC 79540 SURFACE PREPARATION: According to specification. Existing old self-polishing or ablative antifouling: Remove possible oil and grease etc. with suitable detergent, followed by high pressure fresh water cleaning for a thorough removal of any possible weak structure of leached antifouling. Sealer: Whether to use a sealer coat/tiecoat or not depends on the type and condition of the existing antifouling. APPLICATION CONDITIONS: Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation. In confined spaces provide adequate...

Abrir o catálogo na página 2