Catálogos >
Hempel >
Hempasil Nexus X-Tend 27500

Hempasil Nexus X-Tend 27500
1 / 2Páginas

Excertos do catálogo

Product Data HEMPASIL NEXUS X-TEND 27500 Description: HEMPASIL NEXUS X-TEND 27500 is a high solids, one component, silicone based humidity curing tiecoat for HEMPAGUARD®/HEMPASIL topcoats. As a tiecoat for the HEMPAGUARD®/HEMPASIL topcoats used for touch-up and repair of damaged areas of existing silicone top coats securing the adhesion between the anticorrosive system and the HEMPAGUARD®/HEMPASIL topcoat. Minimum curing temperature: 5°C/41°F. As a low temperature tiecoat used in combination with HEMPEL'S NEXUS II 27400 for full coat applications of the HEMPAGUARD® /HEMPASIL topcoats. Minimum curing temperature for this system is 0°C/32°F. Subject to special agreement. PHYSICAL CONSTANTS: Shade nos/Colours: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch: Fully cured: VOC content: Shelf life: 23410 / Yellow. Semi-gloss 65 5.4 m2/l [216.5 sq.ft./US gallon] - 120 micron/4.8 mils 28 °C [82.4 °F] 1.2 kg/litre [10 lbs/US gallon] 3 hour(s) 20°C/68°F 2 day(s) 20°C/68°F 252 g/l [2.1 lbs/US gallon] 18 months (25°C/77°F) from time of production. Depending on storage conditions, mechanical stirring may be necessary before usage. The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. APPLICATION DETAILS: Application method: Thinner (max.vol.): Pot life: Nozzle orifice: Nozzle pressure: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Overcoat interval, min: Overcoat interval, max: Airless spray / Brush/Roller (touch up) (see REMARKS overleaf) No thinning (see REMARKS overleaf) 1 hour(s) 20°C/68°F 0.019 - 0.021 " 150 bar [2175 psi] (Airless spray data are indicative and subject to adjustment) HEMPEL'S THINNER 08080 (see REMARKS overleaf) 120 micron [4.8 mils] 175 micron [7 mils] According to specification. According to specification. Date of issue: October 2018 Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulati

Abrir o catálogo na página 1

Product Data HEMPASIL NEXUS X-TEND 27500 SURFACE PREPARATION: Newbuilding: According to specification. Maintenance, old F/R systems: Possible spot repair with specified HEMPADUR system followed by spot application of the product. In any of the above-mentioned cases, a detailed working specification is available upon request. APPLICATION CONDITIONS: Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation. Maintenance, old F/R systems: Use only where application and curing can proceed at temperatures above:5°C/41°F. Low temperature tiecoat: Use only...

Abrir o catálogo na página 2