Catálogos >
Hempel >
Hempadur Multi-Strength GF 35870

Hempadur Multi-Strength GF 35870
1 / 2Páginas

Excertos do catálogo

Product Data Hempadur Multi-Strength GF 35870 35870 : BASE 35879 : CURING AGENT 98870 Description: HEMPADUR MULTI-STRENGTH GF 35870 is an amine-adduct cured epoxy coating - the product is reinforced with Glassflakes. It is a hard, impact and abrasion resistant coating with good resistance to sea water and splashes from petrol and related products. Suitable for early water exposure and will continue to cure under water. As a self-primed, high build coating primarily for areas subject to abrasion and/or to a highly corrosive environment. E.g. splash zones, jetty pilings and working decks. Service temperature: Maximum, dry exposure only: 140°C/284°F In water (no temperature gradient): 60°C/140°F Maximum peak temperature in water is 80°C/176°F. Recognized Abrasion Resistant Ice Coating by Lloyds Register. Tested for non-contamination of grain cargo at the Newcastle Occupational Health & Hygiene, Great Britain. Part of Group Assortment. Local availability subject to confirmation. PHYSICAL CONSTANTS: Shade nos/Colours: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Surface-dry: Dry to touch: Fully cured: VOC content: Shelf life: 19990 / Black. Glossy 87 ± 1 2.5 m2/l [100.2 sq.ft./US gallon] - 350 micron/14 mils 35 °C [95 °F] 1.3 kg/litre [11.1 lbs/US gallon] 4 approx. hour(s) 20°C/68°F 6 approx. hour(s) 20°C/68°F 7 day(s) 20°C/68°F 227 g/l [1.9 lbs/US gallon] 2 years for BASE and 3 years (25°C/77°F) for CURING AGENT from time of production. The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. APPLICATION DETAILS: Version, mixed product: Mixing ratio: Application method: Thinner (max.vol.): Pot life: Nozzle orifice: Nozzle pressure: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Overcoat interval, min: Overcoat interval, max: Safety: 35870 BASE 35879 : CURING AGENT 98870 3 : 1 by volume Airless spray 08450 (5%) 1 hour(s) 20°C/68°F 0.023 - 0.027 " Reversible 250 bar [3625 psi] (Airless spray data are indicative and subject to adjustment) HEMPEL'S TOOL CLEANER 99610 350 micron [14 mils] 400 micron [16 mils] see REMARKS overleaf see REMARKS overleaf Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations. Date of issue: June

Abrir o catálogo na página 1

Product Data Hempadur Multi-Strength GF 35870 SURFACE PREPARATION: New steel: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Abrasive blasting to near white metal Sa 2½ with a surface profile corresponding to Rugotest No. 3, BN10, Keane-Tator Comparator 3.0 G/S, or ISO Comparator Rough Medium (G). After blasting, clean the surface carefully from abrasives and dust. Maintenance: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh...

Abrir o catálogo na página 2