Catálogos >
Hempel >
HEMPADUR FAST DRY 15560

HEMPADUR FAST DRY 15560
1 / 2Páginas

Excertos do catálogo

Product Data HEMPADUR FAST DRY 15560 15560: BASE 15569 : CURING AGENT 97560 Description: HEMPADUR FAST DRY 15560 is a two-component epoxy paint with a very short drying time. Contains zinc phosphate. Recommended use: As a quick drying primer or intermediate coat in HEMPADUR systems for especially fast recoatable inshop applications. Can be used for on-site work too if eg VOC compliance is requested. Service temperature: Maximum, dry exposure only: 140°C/284°F Certificates/Approvals: Complies with EU Directive 2004/42/EC: subcategory j. Availability: Part of Group Assortment. Local availability subject to confirmation. PHYSICAL CONSTANTS: Shade nos/Colours: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Surface dry: Dry to touch: Fully cured: VOC content: - 12170* / Grey. see REMARKS overleaf. Flat 62 ± 1 6.2 m2/l [248.6 sq.ft./US gallon] - 100 micron/4 mils 27 °C [80.6 °F] 1.4 kg/litre [12 lbs/US gallon] 0.5 approx. hour(s) 20°C/68°F 1 - 1.5 hour(s) 20°C/68°F 7 day(s) 20°C/68°F 351 g/l [2.9 lbs/US gallon] *other shades according to assortment list. The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. APPLICATION DETAILS: Version; mixed product: Mixing ratio: Application method: Thinner (max.vol.): Pot life: Nozzle orifice: Nozzle pressure: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety: Date of issue: January 2012 - 15560 BASE 15569 : CURING AGENT 97560 4 : 1 By volume Airless spray / Air spray / Brush 08450 (5%) / 08450 (15%) / 08450 (5%) 2 hour(s) 20°C/68°F 0.019 - 0.021 " 175 bar [2537.5 psi] (Airless spray data are indicative and subject to adjustment) HEMPEL'S TOOL CLEANER 99610 100 micron [4 mils] see REMARKS overleaf. 175 micron [7 mils] According to specification. According to specification. Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations. Page: 1/2 Product Data Sheet

Abrir o catálogo na página 1

HEMPADUR FAST DRY 15560 SURFACE PREPARATION: New steel: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Abrasive blasting to Sa 2½ (ISO 8501-1:1988). For temporary protection, if required, use a suitable shopprimer. All damage of shopprimer and contamination from storage and fabrication should be thoroughly cleaned prior to final painting. For repair and touch-up use: the product Repair and maintenance: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants...

Abrir o catálogo na página 2