Catálogos >
Hempel >
Globic 9000 78950

Globic 9000 78950
1 / 2Páginas

Excertos do catálogo

Product Data HEMPEL'S ANTIFOULING GLOBIC 9000 78950 Description: HEMPEL'S ANTIFOULING GLOBIC 9000 is a premium high solids chemically hydrolysing SPC antifouling based on Nano Acrylate Technology. GLOBIC 9000 offers leading low friction properties, self-smoothening, and very fine control of polishing for optimal performance. GLOBIC 9000 combines best possible binder and biocide package for premium performance in different trading speeds and outperforms other SPC particularly in slow steaming. The patented microfibers give GLOBIC 9000 a best-in-class mechanical strength to avoid cracking and peeling. This product does not contain organotin compounds acting as biocides and complies with the International Convention on the Control of Harmful Antifouling Systems on Ships as adopted by IMO October 2001 (IMO document AFS/ CONF/26). As an antifouling for bottom and boottop on vessels operating in deep sea trade at medium to high speed and high activity with short idle periods. Aluminium hulls: see REMARKS overleaf. Certificates/Approvals: Availability: Part of Group Assortment. Local availability subject to confirmation. PHYSICAL CONSTANTS: Shade nos/Colours: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch: VOC content: *other shades according to assortment list. The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. APPLICATION DETAILS: Application method: Thinner (max.vol.): Nozzle orifice: Nozzle pressure: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Overcoat interval, min: Overcoat interval, max: Airless spray see REMARKS overleaf 08080 (5%) 0.027 - 0.031 " 270 bar [3915 psi] (Airless spray data are indicative and subject to adjustment) HEMPEL'S THINNER 08080 100 micron [4 mils] see REMARKS overleaf 175 micron [7 mils] According to specification. According to specification. Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations.

Abrir o catálogo na página 1

Product Data HEMPEL'S ANTIFOULING GLOBIC 9000 78950 SURFACE PREPARATION: Existing old self-polishing or ablative antifouling: Remove possible oil and grease etc. with suitable detergent, followed by high pressure fresh water cleaning for a thorough removal of any possible weak structure of leached antifouling. Sealer: Whether to use a sealer coat/tiecoat or not depends on the type and condition of the existing antifouling. APPLICATION CONDITIONS: Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation. In confined spaces provide adequate...

Abrir o catálogo na página 2