Catálogos >
Gurit >
SPABOND™ 730

SPABOND™ 730
1 / 4Páginas

Excertos do catálogo

Full General Datasheet SPABOND™ 730 RAPID STRUCTURAL ADHESIVE ¬ Fast clamp time, high strength, structural adhesive Gels in 10 minutes, solid in 2 hours, Good degree of cure after 6 hours at ambient Available in 400ml 2 component dual cartridges INTRODUCTION Spabond™ 730 is a fast curing structural adhesive designed for applications where reduced clamp times are important. It has a simple 1:1 by weight and volume mix ratio. It can be used to bond together a wide variety of dissimilar materials and has been designed to give a durable high strength bond. Spabond™ 730 is available in cartridges.

Abrir o catálogo na página 1

PRODUCT INFORMATION AVAILABILITY The product is available in a number of formats please contact your local customer support or download the latest product catalogue available on www.gurit.com. TRANSPORT & STORAGE COMPONENT UNITS 10 – 25°C The resin and hardeners should be kept in securely closed containers during transport and storage. Any accidental spillage should be soaked up with sand, sawdust, cotton Spabond™ 730 Resin months 12 waste or any other absorbent material. The area should then be washed clean (see Spabond™ 730 Hardener months 12 appropriate Safety Data Sheet). Adequate long...

Abrir o catálogo na página 2

SPABOND™ 730 This 1 page product summary is intended for use in conjunction with further advice provided under the Instructions for Use section. All data has been generated from typical production material and does not constitute a product specification. MIXING AND HANDLING PROPERTY MIXED SYSTEM Appearance - colour TEST METHOD Appearance - form Thixotropic paste COMPONENT & MIXED SYSTEM VISCOSITY UNITS Spabond™ 730 Resin Viscosity Spabond™ 730 Hardener Viscosity Initial Mixed System Viscosity Clamp Time** TEST METHOD ADHESIVE PERFORMANCE MECHANICAL PROPERTIES TEST STANDARD CURED MECHANICAL...

Abrir o catálogo na página 3

NOTICE All advice, instruction or recommendation is given in good faith but the selling Gurit entity (the Company) only warrants that advice in writing is given with reasonable skill and care. No further duty or responsibility is accepted by the Company. All advice is given subject to the terms and conditions of sale (the Conditions) which are available on request from the Company or may be viewed at Gurit’s Website: www.gurit.com/terms-and-conditions.aspx The Company strongly recommends that Customers make test panels in the final process conditions and conduct appropriate testing of any...

Abrir o catálogo na página 4

SPABOND™ 730 1 / 4Páginas

Excertos do catálogo

Todos os catálogos e folhetos Gurit

SPABOND™ 730
1 / 4Páginas