Catálogos >
GROUPE SOROMAP >
STRAT SO175

STRAT SO175
1 / 1Páginas

Excertos do catálogo

DATA SHEET EPOXY RESIN STRAT SO175 The resin STRAT SO175 is a reactive system developed to combined the ease and comfort of use with the mechanical quality. The versatility of this system makes it well suited to bedding while eliminating the problems of crystallisation due to prolonged storage. The resin STRAT SO175 (resin + hardener) allows, through its viscosity impregnation of glass fiber, Kevlar and carbon, while making the laminate of good mechanical quality. These qualities can be increased after post curing polymerization. The reactivity of the system from 18°C (minimum temperature of work) gives a fast cure non-contact surface stocky or bleaching. Do not use at temperatures below 14°C (air temperature and support) in the case of glaze not to support outside (humidity and cold before 72 h). PHYSICO-CHEMICAL CHARACTERISTICS Density Aspect Viscosity at 20°C Mixing (weight) Mixing (volume) PACKING AND STORAGE Packaging: 15 kg Storage: Keep on packing carefully closed between 15 and 25°C, dry PRECAUTIONS FOR USE Workstations must be properly ventilated. Handling of resin should be using gloves. In contact with skin, wash immediately with soap and water. The use of solvents on the skin should be avoided. If splashed in eyes, rinse immediately with plenty of water and consult a doctor. Ensure the technical qualifications and information of persons likely to handle or come into contact with products HEALTH AND SAFETY See data sheet This information corresponds to the actual state of our knowledge and has the sole object of informing you about our products and possible applications. It is objectively given but does not imply any guarantee by us. Our company may modify all these details at any time SOROMAP PEINTURE VERNIS ZA de Beligon – 1 Rue Maurice Mallet 17300 ROCHEFORT S/MER Tél : 05 46 88 36 13 • Fax : 05 46 88 36 25 • Email : william.thomas@sor

Abrir o catálogo na página 1