Catálogos >
GROUPE SOROMAP >
INFLATABLES ANTIFOULING

INFLATABLES ANTIFOULING
1 / 1Páginas

Excertos do catálogo

PREPARATION OF SURFACE To ensure a perfect paint adhesion, clean the surface thoroughly. Remove all traces of rubber dust with a cloth impregnated with a solvent. It is imperative to dilute the antifouling from 10 to 15 % with the thinner. Only paint onto a dry surface. APPLICATION Mix the antifouling for several minutes in order to ensure it is completely uniform. Apply 2 coats with interval of 8 hours, the craft should be inflated to 80% Wait 24 to 48 hours after the second coat before re-inflating the craft. The boat should not be launched until at least 24 hours after the application of the last coat (maximum 2 months). Only apply with a brush surface. PRECAUTIONS FOR USE Wear gloves, goggles and protective clothes. Do not smoke when using. HEALTH AND SAFETY See data sheet This information corresponds to the actual state of our knowledge and has the sole object of informing you about our products and possible applications. It is objectively given but does not imply any guarantee by us. Our company may modify all these details at any time SOROMAP PEINTURE VERNIS ZA de Beligon – 1 Rue Maurice Mallet 17300 ROCHEFORT S/MER Tél : 05 46 88 36 13 • Fax : 05 46 88 36 25 • Email : william.thomas@soromap.

Abrir o catálogo na página 1