Catálogos >
Graco >
XPTM Plural Component Sprayers

XPTM Plural Component Sprayers
1 / 20Páginas

Excertos do catálogo

XP Plural Component Sprayers TM Easy-to-Use Sprayers for Industrial Coatings PROVEN QUALITY. LEADING TECHNOLOGY.

Graco XP Plural-Component Sprayers Easy and affordable two-component spraying Whether you’re spraying a high-solids polyurethane on the exterior of a steel tank or a marine epoxy on a ship’s hull, Graco helps you get the job done with a complete line-up of XP Plural-Component Sprayers. Engineered for projects that require faster-setting two-part coatings, Graco XP Sprayers are easy to use and provide on-ratio, excellent spray quality for fast-curing materials. If you occasionally change materials, the Graco XP line of sprayers is the right choice. That’s because you can change the ratio by...

Abrir o catálogo na página 2

A Smart Alternative to Hand-mixing Engineered specifically for two-component coatings Graco XP Plural-Component Sprayers provide the reliable performance you need for challenging two-component projects. In addition, the units are designed to maximize gravity feed, which may eliminate the need for feed pumps, saving you money. NXT ® Air Motor • tandard anti-icing feature means production S won’t stop due to motor icing High-pressure to handle high-viscosity coatings • Rated up to 500 bar (7250 psi, 50 MPa) to handle viscous materials and long hose lengths • odular design for easier...

Abrir o catálogo na página 3

Discover How the XP Pays for Itself Quick return on your investment You’ll discover that the Graco XP Plural-Component Sprayer pays for itself when you switch from hand-mixing. Here’s how: Reduces material costs With the Graco XP, you eliminate waste and save money because you only mix as much material as you need. No more throwing away unused material at the end of the day. No more residue left over in smaller pails or cans. You can buy material in bulk as well. Saves money by using less clean-up solvent Only the parts that come in contact with mixed material must be cleaned. Instead of...

Abrir o catálogo na página 4

Discover the Savings – ROI Typical pay back in less than 12 months Compare XP to hand-mixing and see how much you’ll save. XP provides a substantial return on investment compared to hand mixing because you throw away less mixed material, and you use less solvent. Visit www.graco.com/xpROI to calculate an ROI for your application. MATERIAL SAVINGS (by eliminating unused mixed material in pail) Average cost of coating per liter Amount of wasted material per day Average cost of wasted coating per day TOTAL SAVINGS (assumes 200 working days per year) MATERIAL SAVINGS (by shortening mixed...

Abrir o catálogo na página 5

Choose The Right Graco XP For Your Application Graco XP70™ Plural-Component Sprayers High-pressure for high-solids coatings 500 bar (7250 psi) The Graco XP70 is designed to pump, mix and atomize high-viscosity materials with superior results. In addition, the XP70’s design allows you to gravity feed, which may eliminate the need for feed pumps, saving you money. Typical Materials • • • • Environmentally friendly high solids coatings, with little or no solvent High viscosity epoxy coatings – up to 100% solids content Epoxies Urethanes Graco XP50™ Plural-Component Sprayers For jobs requiring...

Abrir o catálogo na página 6

Graco XP-h™ Hydraulic Plural-Component Sprayers For hydraulic power, performance and cost-saving efficiencies Hydraulic systems are the choice of spraying professionals who want to reap the benefits of the latest spraying technologies and add productivity to boost their bottom line. Built with patented XP ratio technology, the Graco XP-h is ideal for truck, palletized, trailer or flatbed systems that have on-board hydraulic power*. The system’s hydraulic motor has been optimized and rated to match the pressure capabilities of the NXT 6500 air motor used on Graco XP50 and XP70 sprayers. •...

Abrir o catálogo na página 7

Technical Specifications XP Technical Specifications (for Air-Powered Models) Fluid filtration Ambient temperature range Note:XP-h pump packages (284XXX) are not EX rated (No heaters, hoppers or solvent flush pump) (Includes 2 heaters, solvent pump and empty hoppers) (combination pressure relief / circulation /prime) outlets back to supply Wetted parts

Abrir o catálogo na página 8

XP Ratio Selection Guide PRESSURE RATIO RESIN PUMP HARDENER PUMP COMBINED OUTPUT CC’S/ CYCLE FLOW RATE at 40 CYCLES/MIN lpm (gpm)

Abrir o catálogo na página 9

XP Options and Accessories Graco Gun Splitter Quick-flush feature saves time and material The Graco Gun Splitter lets you use two spray guns with one XP Plural-Component Sprayer. In addition, you can independently clean and flush one gun, while the other gun remains in use. If you’re using a higher production XP machine such as the XP50 or XP70, the Gun Splitter helps you become even more productive. Graco XP Heated Hoppers For temperature conditioning high viscosity materials Warming up certain materials can make spraying easier and improve production capacity as well. Graco XP Heated...

Abrir o catálogo na página 10

XP Options for Added Productivity MerkurTM Solvent Flush Pump • Quickly flushes mixed materials from hose and gun • Provides enough pressure to push good paint out the mix hose with a spray pattern, resulting in less wasted material • Mounts easily to slotted holes provided on XP cart • Prime valve can be used to supply flush solvent for tip cleaning, or to flush a second hose and gun that have been removed from the tee in the mix line VisconTM Fluid Heaters • educes coating viscosity so it can be sprayed at lower pressure R • Provides consistent spray temperature, resulting in consistent...

Abrir o catálogo na página 11

Ordering Information Sprayers XP35

Abrir o catálogo na página 12

Ordering Information Sprayers XP50

Abrir o catálogo na página 14

Xtreme-Duty™ High-Pressure Hose Selection Chart Hx x xxx Example: H53850 is a 386 bar (5600 psi), 3/8 in, 15.2 meter hose Hose Pressure Rating: 4: 310 bar Hose Diameter: 25: 6.4 mm (1/4 in) Length of Hose: 03: 0.9 m (3 ft) 50: 15.2 m (50 ft)

Abrir o catálogo na página 18

ABOUT GRACO Founded in 1926, Graco is a world leader in fluid handling systems and components. Graco products move, measure, control, dispense and apply a wide range of fluids and viscous materials used in vehicle lubrication, commercial and industrial settings. The company’s success is based on its unwavering commitment to technical excellence, world-class manufacturing and unparalleled customer service. Working closely with qualified distributors, Graco offers systems, products and technology that set the quality standard in a wide range of fluid handling solutions. Graco provides...

Abrir o catálogo na página 20