Dock Float
1 / 7Páginas

Potona S peci al i ze i n C ustomi zed D esi gn, Man uf act ur e, Instal l ati on and Mai ntenance f or Fl oati ng P ontoon Syst em

Mooring Cleat/Bollard

Unsinkable Floats PE Float Technological hole Structural reinforcement for top, bottom and side faces (1) The outer shell of a dock float is made of linear low density polyethylene UR644, and processed by rotational molding with one-time completion. (2) The density of expanded polystyrene foam filled inside a dock float is not less than 15kg/m³. (4) All dock floats are with high resistance of collision, temperature, corrosion and oxidation. (5) All dock floats are with long service life and low maintenance cost. Item The EPS filled inside can satisfy the test requirements of "HUNT" Average...

Buoyancy in Full Immersion (kg) Buoyancy in Full Immersion (kg) (1) We have ready-made molds for above dock floats, and special specifications and colors can be customized for production. (1) We have ready-made molds for above dock floats, and special specifications and colors can be customized for production. (2) The average wall thickness of a dock float is not less than 5mm. (2) The average wall thickness of a dock float is not less than 5mm.

Unsinkable Floats PE Cylindrical-Shaped Buoy Material Linear Low Density Polyethylene (LLDPE UR644) Feature (1) The circular buoys of listed specifications are made of LLDPE UR644, which are with high impact strength and excellent resistance of temperature, corrosion and oxidation, and its service life under natural use conditions is 5 years or more. *The PE float bracket can provide extra buoyancy to the pontoon system and play an adjustment role. (2) Each buoy is integrally molded at one time, with seamless surface and good surface finish. The buoy is filled with not less than 15 kg/m EPS...

Unsinkable Floats PE Spherical Drum Feature (1) The circular buoys of listed specifications are made of LLDPE UR644, which are with high impact strength and excellent resistance of temperature, corrosion and oxidation, and its service life under natural use conditions is 5 years or more. (2) Each buoy is integrally molded at one time, with seamless surface and good surface finish. The buoy is filled with not less than 15 kg/m³ EPS foam to ensure that even if there is damage caused by external impact, it will not sink due to the accumulation of a large amount of water inside. Buoyancy in...

Buoyancy in Half Immersion (kg) Notes: (1) We have ready-made molds for above dock floats, and special specifications and colors can be customized for production. (2) The average wall thickness of a dock float is not less than 5mm.