Catálogos >
Furuno >
AUTOPILOT NAVpilot-300/711C

AUTOPILOT NAVpilot-300/711C
1 / 6Páginas

Excertos do catálogo

NAVpilot-300 with Gesture Controller

NAVpilot remarkable self-learning, adaptive software is developed by collaborative works between FURUNO and FLSI. Self-Learning and adaptive software; each time the boat goes to sea, the software learns the sea conditions and calculates the best adjustment for smooth steering ▶ Fantum Feedback™ offers simplified installation while delivering enhanced steering control no need for physical rudder feedback unit ▶ Volvo Penta IPS, Yamaha Helm Master™, Yanmar, and Seastar VCS compatible ▶ Easy installation and smart network-based system configuration ▶ Waterproof Processing Unit (IP55) and...

Abrir o catálogo na página 2

Remote Navigation In The Palm of Your Hands (NAVpilot-300 only) Autopilot Control from NavNet TZtouch Series and GP-1871F/1971F The Gesture Controller is a revolutionary and unique way to steer your boat remotely. By using Bluetooth signals, it is possible to control the Autopilot from anywhere on the boat within 10 meters. Just push and hold the button, point to the desired heading, and release the button to let the Autopilot redirect the boat! Furuno’s NAVpilot Series are designed to match the GPS Chart Plotter GP-1871F/GP-1971F, the NavNet TZtouch Series, and other Furuno navigation...

Abrir o catálogo na página 3

NAVpilot Offers Self-Learning and Adaptive Software From the first dockside setup through the last voyage you made, NAVpilot continues to learn your vessel’s steering characteristics. This allows dynamic adjustments to the boat’s steering for vessel speed, trim, draft, tide and wind effects, weather, etc. These characteristics are stored in the processor’s memory where they are continuously optimized to make the NAVpilot more versatile. Auto Tide and Wind Maintains the desired heading, but the vessel may drift off course due to the effects of tide and wind. Maintains the desired heading...

Abrir o catálogo na página 4

Cut-out for flush mount (Wall thickness less than 10 mm) Cut-out for flush mount INTERCONNECTION DIAGRAM INTERCONNECTION DIAGRAM Control Unit FAP-7011C Standard Option Control Unit Qty: MAX. 6*1 The processor unit has two bus channels for the unit control. Three control units can be connected per each bus line. Standard Option User Supply Gesture Controller GC-001 (Max. 3 Units) Solenoid Valve Contact Signal OUT Hydraulic Linear Drive 12/24 VDC PC (for service) Reversible Pump Control Unit FAP-3011 (Max. 3 Units) Rudder Reference Unit FAP-6112 Linear Sensor Event Switch NavNet TZtouch...

Abrir o catálogo na página 5

CONTROL UNIT Screen Size/Type Effective Display Area Screen Resolution Screen Brightness Screen Contrast 4.1" TFT color LCD 82.56 (W) x 61.92 (H) mm 320 x 240 dots (QVGA) 700 cd/m2 typical 8 steps PROCESSOR UNIT STBY, Auto, Dodge, NFU (Non-follow up), Turn, SABIKI™, FishHunter™, Advanced Auto*, Navigation* Steering Mode STBY, Auto, Dodge, Turn, Remote, SABIKI™, Advanced Auto*, Navigation*, Wind*, FishHunter™* *External data required Weather Mode Rudder Gain Counter Rudder Trim Gain Trim Adjustment Change Course Speed Rudder Angle Settings Heading deviation, Watch Motor Drive *External data...

Abrir o catálogo na página 6