Catálogos >
Euro CLS >
CLS-1042MRM2TF-S2

CLS-1042MRM2TF-S2
1 / 2Páginas

Excertos do catálogo

10.4" Bridge System Display(S2) Marine Bridge System Display(S2) Marine CLS-1042MRM2TF-S2 Features: Hyper Dimming : OSD control backlight brightness from nearly 0% to 100% Sunlight Readable : Transflective film technology enhance visibility : IP65 aluminum housing with powder coating design (IP54 rear) Wide Voltage Range Input : 9 to 36V DC to DC power input acceptable (Isolation Resistance) Touchscreen/ Protection Glass : High quality touchscreen / AR protection glass for option IP65 OSD Fornt Panel Design : PIP(picture in picture) function and multi-video inputs : Ease of use front panel OSD control : Enhanced shock and vibration resistance Multiscan Function Mechanical Design Drawings Wide Voltage Range Power Module Touch Controller Front Bezel Touch / Glass (Optional) Scaling Board Panel Inverter Board (Optional) Metal Frame Modularized Construction SIDE VIEW FRONT VIEW PANEL CUTOUT User Controls: Power On/Off via Front Button Power Mode Status LED On Screen Display control(OSD) OSD Remote Control via RS-232 Power Specifications: Power Supply Options Power Consumption : 9 to 36 V DC power supply with Terminal block (Default) 90 to 265V AC powersupply : 24 W typical, normal operation Input Signals: RGB Signal Composite Video S-Video Signal DVI-D Signal DC Power Signal AC Power Signal (optional) Touch Screen (Optional) Remote via RS-232(Optional) All Dimensions are+ 0.5 mm BOTTOM VIEW Note: this is a simplified drawing and some components are not marked in detail. Please contact our sales representative if you need further product information. BACK VIEW Pixel Number Pixel Pitch(RGB) Contrast Ratio Light Intensity Viewable Angles Active Display Area Max Colors D-SUB 15P connector(female) RCA phono plug S-Video (SVHS) plug DVI-D input 24pin connector Screw terminal block Std IEC Inlet D-SUB 9P connector (female) D-SUB 9P connector (female) Mechanical Mounting Operating Temperature Operating Humidity Anti-Vibration Anti-Shock * SAW touch for IP54 Panel (Flush) mount with IP65*, VESA, Bracket mounting -10 to 55 deg.C (-20 to 60 deg.C for optional heating) 5% to 95% (non condensing) 5Hz~500Hz / 1Grms/3 Axis 15G, 11ms duraiton SAW, 5 Wire Resistive 3mm Anti-reflective protection glass Yes (Enhance Visibility) Yes (90 to 265 V AC power input) Yes (One robust bracket can adjust from -10 to 30 deg.) Yes Available Options: Touch Screen Options AR Safety Glass Options Transflective Options AC power Options Bracket Mounting Options Transflective

Abrir o catálogo na página 1

10.4" Bridge System Display(S2) Marine Bridge System Display(S2) Marine CLS-1042MRM2TF-S2 Mechanical Design with Robust Bracket (options) SIDE VIEW BOTTOM VIEW ROOF MOUNT BACK VIEW STAND ANGLE ROOF MOUNT STAND ANGLE Certification and Approvals : IEC 60945, DVN 2.4, IACS-E10 DNV Type Approval, CE, FCC

Abrir o catálogo na página 2