Catálogos >
ENAG >
WATER SEPARATOR TO AVOID MOISTURE FOR INLET AIR

WATER SEPARATOR TO AVOID MOISTURE FOR INLET AIR
1 / 4Páginas

Excertos do catálogo

WATER SEPARATOR TO AVOID MOISTURE FOR INLET AIR - 1

Water Separators Water separators are designed for marine applications. Their high efficiency enables to restrict water and humidity aspiration by the fans located in the engine rooms. Their installation is easy and no specific maintenance is required. Different models can be proposed: with or without the mask louvre, with or without filters . . Description The separators are made of a frame, a water separator and a net with a mask louver and filter as options. Available in both of marine grade aluminium with a polyester paint finish (RAL 9010 white, other colors on request) or stainless steel (AISI 316), they can be mounted with an inclination of 45° maximum in relation to the vertical. Recommended air speed in water separators is approximately 4 - 5 m/s for SEA range and 4 – 9 m/S for SEAW range. The speed is measured in function of the front surface and air flow in m3/s or m3/h. The efficiency is calculated following the EN13030:2001 standards. Mask Louvre (ML) Frame

Abrir o catálogo na página 1

WATER SEPARATOR TO AVOID MOISTURE FOR INLET AIR - 2

SEA range Efficiency Pressure loss Efficiency measured for 75mm/h precipitation rate Symbols and units qv Air flow rate, m3fe v Core velocity, m/s Ps 1 Static pressu re of device, Pa Ce Entry loss coefficient, - Pressure loss Efficiency measured for 75mm/h precipitation rate Symbols and units qv Airflow rate, m3/s v Core velocity, m/s Psl Static pressure of device, Pa Ce Entry loss coefficient, - The information contained in this leaflet is not of a contractual nature. ENAG reserves the right to amend the technical details of its products without advance notice. ENAG S.A.S. - 31 Rue Marcel...

Abrir o catálogo na página 2

WATER SEPARATOR TO AVOID MOISTURE FOR INLET AIR - 3

Customized range Nota : Dept 165, 220, 270mm depending on option Specific design based on customer requirements Separator with integrated sand filter, easily disassembled for cleaning FC-SE-EN -E The information contained in this leaflet is not of a contractual nature. ENAG reserves the right to amend the technical details of its products without advance notice. ENAG S.A.S. - 31 Rue Marcel Paul - Z.I. Kerdroniou Est - 29000 Quimper – France Tel : + 33 2 98 55 51 99 – Fax : + 33 2 98 55 51 67 - E-mail : contact@enag.fr – Site : www.enag

Abrir o catálogo na página 3

WATER SEPARATOR TO AVOID MOISTURE FOR INLET AIR - 4

Examples of ENAG standard and customized water separators Separators in specific dimensions and shapes available Water separator with water proof hatch in steel or stainless steel FC-SE-EN -E The information contained in this leaflet is not of a contractual nature. ENAG reserves the right to amend the technical details of its products without advance notice. ENAG S.A.S. - 31 Rue Marcel Paul - Z.I. Kerdroniou Est - 29000 Quimper – France Tel : + 33 2 98 55 51 99 – Fax : + 33 2 98 55 51 67 - E-mail : contact@enag.fr – Site : www.enag

Abrir o catálogo na página 4