BlueAIS®
1 / 6Páginas

collision avoidance See and be seen by other vessels Navigate safely in poor visibility Be alerted about possible collision early on WIRELESS DATA SOLUTIONS

AIS – Automatic Identification System An Automatic Identification System (AIS) is a location and vessel information reporting system that greatly contributes to safety at sea: • It is used on ships to identify and locate other AIS equipped vessels by electronically exchanging data with them. • AIS data is also exchanged between the vessel and AIS land stations which allows maritime authorities to track and monitor vessel movements along their coasts. • AIS stations called ATON (Aid TO Navigation) help vessels by transmitting locations of coastal threats, like shallows, reefs and islands,...

BlueAIS® automatically shares your vessel’s static information about: • Call sign and name • MMSI (Maritime Mobile Service Identity) • Type and dimensions BlueAIS® is an essential safety and navigation device for collision avoidance since it continuously receives information from all Class A and Class B equipped vessels and displays this information on the standard chart/AIS plotter or PC. At the same time BlueAIS® will automatically transmit the position to all AIS equipped vessels or land stations. BlueAIS® is a vital navigation tool in poor visibility conditions due to bad weather and...

BlueAIS® model range Beside the exceptional BlueAIS® premium, the BlueAIS® range offers two additional models - BlueAIS® ext-B and BlueAIS® 12W, both with distinct advantages. BlueAIS® Premium transponder BlueAIS Premium is a fully integrated AIS solution in a single, open air installable housing. The VHF and GPS electronics and both antennas are integrated on or inside an IP69 grade waterproof enclosure. BlueAIS® Premium’s design reduces overall cabling from typically 3 cables run for the common AIS design to one cable only. ® BlueAIS® ext-B: new feature – new advantage BlueAIS® ext-B...

ConBoxAIS Your BlueAIS® connection is easy and compliant with electrical wiring standards; the ConBoxAIS connection box enables water tight cable and wire connectivity (optional). BlueAIS® cable It’s a weather and oil resistant shielded cable with IP69 grade connector with Security seal option. Even the cable length up to 50 m does not degrade system specification and it’s available on request. 15 m BlueAIS® cable is included in the price of BlueAIS®. MastMount RailMount A BlueAIS® mounting bracket made of marine stainless steel for installation on horizontal rails and poles. It is light...

BlueAIS® technical specification Dimensions: 198 x 198 x 70 mm (L x W x H) Power supply Power Consumption 12V DC nominal (9.6 -15.6V) 4 W on average, 0.33 A continuous Data Interfaces RS232 38.4k baud bi-directional RS422 NMEA 38.4baud bi-directional GPS Receiver 16 channel U-blox (including internal GPS active antenna) Antenna input is ESD protected to 15kV against hostile damaging RADAR fields VHF Transceiver Transmitter x 1 Receiver x 2 Transmit power: 2W Frequency: 156.025 to 162.025 MHz in 25KHz steps Output power: 33dBm ± 1.5 dB Channel bandwidth: 25KHz Channel step: 25KHz Modulation...